var artikel=new Array(378);

artikel[0]='FIN800SX2	ENGINE	955.00	Factory Dry Pipe for SX-R800	../motor/m-fp-fin800sx01.jpg				Factory Pipe 800SX-R Dry exhaust system<br>This water-jacketed pipe adds 27 horsepower over the stock exhaust<br>All that power with just the pipe, rejetted carbs (jet included)<br>A gain of 6 mph and had peak power at 7100 rpm<br>This is the must have 800 SX-R system for closed course racing.<br>Fit all year SXR 2003-2011.		';
artikel[1]='ATPWBXSXR	ENGINE	279.00	New Factory SXR Waterbox	../2011/ATP.jpg				 SXR 800 aluminium Waterbox<br>This not only offers an impressive increase in power and throttle response due to it is ability to evacuate the water so efficiently, it also holds alot less water than the OEM SXR waterbox due to the smaller volume<br>The Race SXR waterbox gives a genuine positive effect you can really feel on the water<br>The SXR Waterbox is also designed to optimize space and be a simple & perfect fit in the SXR hull<br>Supplied with an aluminium coupling hose and silicone elbow		';
artikel[2]='FP-oring	ENGINE	13.60	Factory Drypipe O-Ring Set (3 orings) 	../motor/oring.jpg				Replace your cracked or worn out O-rings in your Factory Dry Pipe with our high quality replacement O-rings<br>Complete set with all Three O-rings		';
artikel[3]='dryrubber	ENGINE	39.60	Factory Drypipe HD Coupler Kit 	../motor/dryrubber.jpg				Seals Your Dry Pipe and gain horsepower<br>Longer O-Ring life and better seal than original blue FP ubber sleeve		';
artikel[4]='COMFTG0036	ENGINE	12.40	Factory Water Filter 	../motor/dryfilter.jpg				Replacement Waterfilter from Factory Dry Pipes<br>Dirty and closing water filter can damage Your exhaust tubes from to much heat		';
artikel[5]='COMMNT0052	ENGINE	25.60	Factory Drypipe Lord Rubber Mount 	../motor/lordmount.jpg				Factory Dry Pipe Lord Rubbr Mount		';
artikel[6]='COMHOS	ENGINE	15.50	Factory Exhaust Hose 	../2011/FPR.jpg				Factory Dry Pipe Exhaust Hose - Waterbox to Factory Chamber		';
artikel[7]='wetpipe	ENGINE	895.00	Factory WET Pipe SX-R800	../sxr/wet.jpg				The 800 SX-R Wet Pipe is single wall so it’s lighter than Dry Pipe.<br>It’s based on the proven “B” pipe design so you know it’s reliable and has excellent throttle response.<br>Installation is a snap and no hood modifications are required.<br>The black, hard anodizing provides the ultimate in salt-water corrosion resistance.<br>Of course the 800 SX-R Wet Pipe incorporates the tunable headpipe design, with a simple turn of an Allen wrench you can adjust the power curve to your liking		';
artikel[8]='5900	ENGINE	11.80	Factory Wetpipe Exhaust Green Gasket 	../motor/exhaust-gasket-wet.jpg				Factory Pipe Exhaust Manifold gasket for all Wetpipe or B-Pipe Exhaust system		';
artikel[9]='COMHOS0100	ENGINE	32.00	Factory Wetpipe Rubber Coupler 	../motor/wet-rubber.jpg				Factory Pipe Blue Wetpipe or B-Pipe Exhaust Coupler Rubber		';
artikel[10]='11060-3759	ENGINE	13.90	Kawasaki OEM Exhaust Gasket 	../motor/ex-gasket.jpg				Original Exhaust gasket from OEM Kawasaki Part No. 11060-3759<br>(2 required)		';
artikel[11]='11060-3712	ENGINE	20.50	Kawasaki OEM Exhaust Muffler Gasket 	../2010/110603712.jpg				Original Exhaust gasket from OEM Kawasaki Part No. 11060-3712		';
artikel[12]='cool-ex	ENGINE	29.95	Cool Exhaust Gasket Set 	../motor/cool.jpg				Cool Exhaust gasket<br>Better cooling<br>Made in Japan<br>(set with two gasket included)		';
artikel[13]='TBM107G	ENGINE	345.00	TBM Billet Girdle Head	../motor/tbmhead.jpg				TBM Girdle head body and cap is constructed of 6061 aluminum, while the domes are machined from 7075, which is much more durable and rarely used due to it’s high cost<br>This head utilizes a three-piece design that has water flow control not possible with a one-piece head<br>No gaskets or messy silicone needed as it’s completely sealed by o-rings<br>Head comes with all hardware to use with Factory Dry Pipe<br>Girdle Kit is a must have to save cylinder cracking.<br>Domes not included.		';
artikel[14]='TBM107-	ENGINE	96.50	TBM Domes for TBM107G Head Kit	../motor/domes.jpg		22cc-STD|30cc-STD|26cc-LTD|26cc-LTD-BB|27cc-LTD|27cc-LTD-BB|28cc-LTD|29cc-LTD-BB		TBM interchangeable domes are compatible with TBM Non-Girdled and Girdled Head Kits<br>Manufactured from billet 7075 aluminum alloy and hard anodized for even heat dissipation and corrosion protection<br>TBM domes feature a unique bowl shape that is not your typical spherical configuration<br>Team Kawasaki has proven this design for the past four seasons<br>Also featuring a stepped squish band which optimizes the piston to dome clearance to gain unsurpassed performance<br>STD. domes are compatible with any year SX-R 800 cylinder and 0.5mm base gasket<br>LTD. domes must use with 1.5mm base gasket<br>BB. domes are for Wiseco 84 or 84.50mm Pistons needed<br>Base gasket order seperate - not included		';
artikel[15]='TBM-oring	ENGINE	26.80	TBM O-Ring Replacement Kit	../motor/orings.jpg		83mm Domes|Big Bore Domes		Complete O-ring replacement for TBM107 and TBM107-G (Girdled Head Kit)		';
artikel[16]='KA80030cc	ENGINE	399.00	ADA Kawasaki SX-R 800 Billet Head Kit incl. Domes	../2010/ada-head.jpg				ADA Kawasaski SX-R 800 head kit<br>Included two ADA 30cc 180PSI domes for normal pump fuel, complete O-Ring kit and brass fittings<br>ADA Head is complete O-Rings sealed and come with dual water outlets for additional cooling<br>All Hardware included - fit with original exhaust and FP Wet pipe<br>For limited and Superstock modification with Dry Pipe we highly recommeded only TBM Girdle type Head against cylinder breaking.		';
artikel[17]='ORKITK750	ENGINE	27.00	ADA O-Ring Replacement Kit	../2011/ada-o.jpg				Complete ADA O-ring replacement KA800 and KA750 Head Kit		';
artikel[18]='HR4061	ENGINE	585.00	HOT RODS New Complete Crankshaft	../motor/crank.jpg				All new assembly. Crankshafts are sold complete with Hot Rods Connecting rods, main bearings and inner crankshaft webs<br>Trued to within .001.<br>Hot Rods crankshafts are completetely rebuildable<br>Fit SX750 96-02 and SXR800 2003-2011		';
artikel[19]='13031-3730	ENGINE	959.00	Kawasaki OEM Crankshaft	../motor/crankshaft.jpg				Original Kawasaki 13031-3730 Crankshaft<br>Made in Japan - Original Kawasaki High Quality Part		';
artikel[20]='14001-5391	ENGINE	726.90	Kawasaki SX-R Crankcase	../2011/140015391.jpg				Original Kawasaki OEM Crankcase 14001-5391<br>Come included needed 92028-3718 Bushing		';
artikel[21]='42505	ENGINE	39.95	ProX Crankshaft Oil Seal Kit 	../motor/sealkit.jpg				High Quality Crankshaft oil seal kit fit all SX650 / 750 and SXR800 engines all years<br>(Complete set with all three seals needed)		';
artikel[22]='670B2016	ENGINE	1.20	O-Ring Crankshaft 	../2010/670B2016.jpg				Original Kawasaki OEM Part No. 670B2016		';
artikel[23]='92049-3706	ENGINE	9.60	Seal Oil, Cranshaft 	../2010/920493706.jpg				Original Kawasaki OEM Part No. 92049-3706		';
artikel[24]='92049-3713	ENGINE	21.90	Seal Oil, Cranshaft 	../2010/920493713.jpg				Original Kawasaki OEM Part No. 92049-3713<br>(2 required)		';
artikel[25]='11060-3711	ENGINE	8.00	Kawasaki OEM Paper Base Gasket 	../motor/110603711.jpg				Original Kawasaki 11060-3711 Paper Base Gasket<br>Economy replacement - do not use with any exhaust modification - it blown out easily		';
artikel[26]='gasket	ENGINE	18.50	Kawasaki 750/800 Metal Core Base Gasket	../motor/gasket.jpg		0.5mm|0.75mm|1.00mm|1.25mm|1.50mm		We highly recommend using on all modification this base gasket<br>Standard OEM gasket size is 0.5mm		';
artikel[27]='11004-3720	ENGINE	25.00	Kawasaki OEM Head Gasket 	../motor/head-gasket.jpg		SX-R 800|SX/SXI 750		Original Head gasket from OEM Kawasaki<br>Kawasaki Part No. 11004-3720		';
artikel[28]='11004-3720BB	ENGINE	25.00	Big Bore Head Gasket 85mm 	../motor/85head-gasket.jpg				Big Bore Head Gasket for 84.00, 84.50 or 85.00mm Pistons<br>Must use if You bore original SX-R800 Cylinder 84mm or more and use Wiseco Pistons		';
artikel[29]='11005-3760	ENGINE	669.00	Kawasaki OEM Cylinder 	../motor/cylinder.jpg				Original Kawasaki OEM Cylinder fit all year SX-R800 2003-2011<br>Kawasaki Part No. 11005-3760		';
artikel[30]='92004-3752	ENGINE	4.00	Kawasaki Cylinder Studs 	../2011/920043752.jpg				Original Kawasaki Cylinder studs<br>We recommend replace the stud with each cylinder exchange and to avoid later torn and difficult to pin removable<br>Kawasaki Part No. 92004-3752		';
artikel[31]='809M08400	ENGINE	179.00	Wiseco Big Bore Racing Piston Kit 	../2010/wiseco.jpg		84.00|84.50		Make Your Kawasaki SX-R800 to a Big Bore 850 Engine - also IJSBA Stock Class legal<br>Fit with original Kawasaki cylinder sleeve<br>Wiseco Piston kit are high quality forged alloy and include rings, taper wall wrist pins and circlips		';
artikel[32]='ProX-	ENGINE	105.00	Pro-X Piston Kits 	../motor/prox.jpg		82.00|82.25|82.50|83.00		ProX Piston Kits are manufactured in Japan and are designed to be OEM replacement<br>The aluminum alloy exceeds the factory specifications<br>Kit comes complete with piston, piston pin, ring set and clips<br>Please do not forget to order and mount new top end bearing when You change pistons!		';
artikel[33]='13033-3703	ENGINE	19.60	Original Kawasaki Piston Top End Bearing	../motor/bearing.jpg				Original Kawasaki OEM Part<br>Kawasaki Part No. 13033-3703		';
artikel[34]='007-627-01	ENGINE	49.95	Top End Engine Gasket Kit 	../motor/00762701.jpg				Aftermarket Top End Gasket Complete Kit<br>Fit all year Kawasaki SXR 800		';
artikel[35]='MR-00027	ENGINE	89.95	Motoine Racing Heavy Duty Throttle Shaft Mikuni 46-50mm 	../motor/carbshaft.jpg				Stainless Steel Mikuni 46-50mm Throttle Shaft<br>Motoine Racing Japan<br>Included Stainless Steel shaft, bolts, shims,E-Clips		';
artikel[36]='48-012	ENGINE	33.00	Jetworks 48mm Throttle Valve 	../2011/48-012.jpg				48mm Mikuni Butterfly - fit all aftermarket 48mm Carbs included Novi, Novi-tec, Riva, Fullspectrum and others		';
artikel[37]='ada-drum	ENGINE	33.30	ada Throttle drum 	../motor/ada-drum.jpg				Fit original SXR carbs and all aftermarket carbs.		';
artikel[38]='290-00200	ENGINE	29.95	Novi Diaphram Mount Throttle Bracket 	../motor/290-00200.jpg				Throttle Cable Bracket for all Dual Twin Carbs on SX-R 800 Engines		';
artikel[39]='53-3328	ENGINE	59.95	Mikuni High Volume Fuel Pump 	../2009/53-3328.jpg				Mikuni High Volume Fuel Pump<br>61 Liter per hour		';
artikel[40]='53-2114	ENGINE	59.95	Mikuni Carb Rebuild Kit 	../2009/53-2114.jpg				Kits included all necessary gaskets, diaphragms and hardware required to disassemble and rebuild Mikuni carburator<br>Fit Kawasaki 750 98-02 and all Kawasaki 800 SXR 03-11 carbs.		';
artikel[41]='MR-00013	ENGINE	18.50	MR Racing Mikuni Soft Spring 	../motor/MR-00013.jpg		OEM Carb|Aftermarket Carb		30% more Soft then original Mikuni Spring<br>Makes throttle operation much easier, save energy and help again arm pump<br>Fit Novi, Riva Powerbomp, Full Spectrum or SE Mikuni style carbs.<br>Easy to change		';
artikel[42]='53-9994	ENGINE	33.50	Carb Screw Adjuster Tool	../stuff/adjuster.jpg				A special 90-degree screwdriver, designed to adjust carberatur adjuster screw on original Kawasaki SX-R 800 carb Low and High Screw		';
artikel[43]='SA-100/500	ENGINE	17.80	OEM Carb Adjuster Screw with Cross Bar	../2011/sa100.jpg		Low Screw|High Screw		Carb Adjuster Screw with Crossbar<br>Fit OEM SX-R Carb - all SX-R 800 2003-2011<br>For complete SX-R Carb 2x Low and 2x High Crossbar Screw needed		';
artikel[44]='LK-2	ENGINE	49.95	Jetworks Carburetor Coupler Linkage 	../motor/LK2.jpg				JETWORKS Carburator Linkage - using 120mm center to center for all aftermarket Dual carb applications<br>Made to have zero backlashes and will not compress after age.<br>Made in USA		';
artikel[45]='11060-3761	ENGINE	5.30	Gasket, Carb OEM Part No. 11060-3761 	../2010/110603761.jpg				Gasket Carb for original OEM Carb 42mm, Kawasaki Part No. 11060-3761<br>(4 required)			';
artikel[46]='9257	ENGINE	4.90	Novi Carb 48mm Gasket 	../motor/carb-gasket.jpg				Thick Green Gaskets<br>(2 required)			';
artikel[47]='231-75148	ENGINE	249.95	R&D Dual Intake Manifolds 	../motor/manifold.jpg				R&D Dual Carb Manifold for all 48mm carburator<br>with billet carb plate and using with V-Force Reeds		';
artikel[48]='12-0010	ENGINE	6.50	R&D Manifold Gasket	../Kawasaki/120010.jpg				R&D Gasket for 231-75148 Dual Intake Manifold		';
artikel[49]='vforce3	ENGINE	299.00	V-Force 3 Valve System 	../motor/vforce.jpg				New VForce 3 Valve system kit<br>New cage and carbon reeds design give You the most power and response<br>Works with all engine modification<br>Complete set (2 reed block and gaskets)<br>Fit all Kawasaki SXR800 and 750 SXI		';
artikel[50]='3P794A	ENGINE	82.00	V-Force Replacement Reeds	../motor/reeds.jpg		V-Force3|V-Force2		VForce 3 recplacement carbon reed kit<br>(2 required for complete engine)		';
artikel[51]='TBM106	ENGINE	89.95	TBM Angled Reed Spacer 	../motor/tbm-rs.jpg				TBM angled reed spacers position the reed cages in the optimal position and longer reed life<br>Included an integrated pulse fitting (needed for big dual carburators) without drilling original crankcase<br>Compatible with stock, or aftermarket cages and come complete with all necessary hardware and gaskets.		';
artikel[52]='11060-3717	ENGINE	4.80	Kawasaki Reed Gasket 	../motor/reed-gasket.jpg				Reed Gasket for original or aftermarket Reeds (V-Force)<br>(4 required with V-Vorce and 2 with original Reed Case)<br>Kawasaki Part No. 11060-3717			';
artikel[53]='53-4274-BLK	ENGINE	69.95	Tau Ceti Racing 2.5 Tornado Filter Black 	../motor/534272blk.jpg				The NEW Tau Ceti Tornado Series air filter with a cone shape filter feature a clear velocity cone to get more and faster air inside ventury for maximum power<br>This is now the highest quality air filter on market - only made from highest quality aluminum and rubber with stainless steel screen.<br>For stock our jetting kit will give best performance and also air filter adapter needed		';
artikel[54]='006-585	ENGINE	49.95	PROK Multi-Fit Flame Arrestor 	../motor/prok.jpg				Prök Multi-Fit revolutionized the flame arrestor industry and is the choice of top teams and riders around the world<br>From the quality of its non-absorbing stainless element, to the internal support and large parabolic cone, its performance is cutting edge. The rubber base of the Multi-Fit clamps around any conventional carburetor adapter flange<br>Weighing in at only 148g, it is the lightest in the world but its quality and construction put it with our Quick-Fit as the strongest in the world able to hold over 300lbs of weight		';
artikel[55]='WR125-225	ENGINE	18.95	Outerwears Pre-Filter for Tau Ceti, Prök or K&N air filter	../motor/wr-125.jpg		Round|Cone|Tornado|Prok|K&N		Outerwears pretilter is an excellent solution to prevent water from entering into the engine without restricting air flow or causing a loss in performance<br>Rec. for freestyle, freeride and also all racing modifications 		';
artikel[56]='53-4465	ENGINE	23.50	Mikuni Aluminum air filter adapter for stock SXR carb 	../motor/adapter.jpg				Fit all year original carburator SXR 800 (03-11)<br>SX/SXI 750 year 96-02		';
artikel[57]='SXRjet	ENGINE	24.00	Stock Jet Kit for SXR800 	../motor/jets.jpg				Better speed and acceleration with our special jet and spring kit for original SXR800 carbs to use with open air filter and original exhaust system<br>Prevent also with longer engine life<br>Kit included 2x Low, 2x Main Jets and 2x carb spring<br>High Screw adjust 1 1/2<br>Low speed adjust 1 1/4		';
artikel[58]='Mikunki-	ENGINE	5.00	Mikuni Low or Main Jet	../motor/mikuni.jpg		Main|Low	200|180|165|160|157.5|155|152.5|150|147.5|145|140|135|132.5|130|125.5|125|120|115|110|100|90|85|82.5|80|77.5|75|72.5|60	Original Mikuni Low and Main Jets that fit in all Mikuni, Novi, Fullspectrum, Speedmagic, Riva carb		';
artikel[59]='spring	ENGINE	4.00	Mikuni Arm Springs	../motor/spring.jpg		65g|80g|95g|115g		Original Mikuni arm spring 		';
artikel[60]='NS-	ENGINE	19.80	Mikuni Viton Needle&Seats	../motor/seat.jpg		1.5|2.0|2.3|2.5		Original Mikuni Viton Tip Needle&Seat 		';
artikel[61]='53-9928	ENGINE	29.95	Mikuni Dual Primer Kit 	../motor/primer.jpg				A cure for hard-starting motors<br>Draws fuel from the fuel line to give the carburator a blast of fuel for easy staring<br>Eliminates the need of chokes plates for better air flow and power and adds to battery life<br>Included all hardware, plunger, lines, zip ties, brass and t-fitting and spigot &caps.		';
artikel[62]='53-9928A	ENGINE	15.00	Primer Plunger only 	../2011/plunger.jpg				Replacement Primer Plunger		';
artikel[63]='53-9970	ENGINE	5.00	Fuel Line or Primer Line (Clear Blue) 	../motor/fuelline.jpg		Fuel Line|Primer Line		High quality clear blue Fuel or Primer Line<br>Fuel or Primer Line is sold per one meter 		';
artikel[64]='53-9953	ENGINE	3.80	Fuel Filter 	../motor/filter.jpg				High quality fuel line filter that fit in original and aftermarket fuel lines on all jetski 		';
artikel[65]='53-9928	ENGINE	6.00	Water Line Hose (Blue) 	../motor/waterline.jpg		3/8"|1/2"		Flexibility, Durability, abrasion resistance, light weitht, chemical resistance, high pressure capability waterline blue<br>Waterline is sold per 1 Meter 		';
artikel[66]='52-3119	ENGINE	59.95	Jet Works Pro Flow Control Valve	../stuff/jetworks.jpg				The Pro Flow Control Valve provides improved throttle response and much quicker starts by drying out your waterbox at low rpm and idle speeds<br>The Flow Control Valves allows unrestricted water flow to the Stinger for better top speed and control the amount of water at low speeds for better throttle response<br>Works good with Factory Wet Pipes or for control the water flow in waterlines<br>Fully adjustable		';
artikel[67]='59-4017	ENGINE	7.40	Squeeze On Stainless Steel Clamp (10pcs/pk) 	../2009/594017.jpg		3/8"|1/2"		High quality stainless steel squeeze on clamps for 3/8 or 1/2 waterlines<br>Quick and simple to install<br>Crimp on clamps are extremely strong and do not break or come loose like conventional hose clamp<br>Packing included 10 pieces 		';
artikel[68]='64-0030	ENGINE	2.20	Stainless Hose Clamp	../2011/640030.jpg				Stainless Hose Clamp for 1/2 and 3/8 waterline<br>8-22mm - High quality		';
artikel[69]='64009	ENGINE	6.00	Brass Fitting 	../stuff/fittings.jpg		3/8"Hose 90°|3/8"Hose Straight|1/2"Hose 90°|Plug		Brass Fitting for Engine Head, Exhaust and Pumps 		';
artikel[70]='331-80000	ENGINE	29.95	R&D Kawasaki SXR800 Stock Exhaust Power Sleeve 	../motor/331-8000.jpg				New R&D billet aluminum exhaust power sleeve is designed to insert into the stinger of stock exhaust to reduce stinger size for more back pressure.<br>This is a simple installation that will increase horsepower and top speed.		';
artikel[71]='RT107-217	ENGINE	18.50	Racetemp Temp strips	../motor/RT127.jpg		42-103°|65-120°		Racetemps temperature monotoring sticker is a small visible strip that enables machine operators to quickly and accurately dermine the temperature of vital components at exhaust, cylinder and heads, exhaust rubber<br>Two different Temperatur Range (Celsius and Fahrenheit)<br>(Pack included 3 strips)		';
artikel[72]='Igni-SXR	ELECTRICAL	499.00	Igni Pro Programmable Ignition	../motor/igni07.jpg				Best getting better!<br>New updated ignition does not require battery power (like on old Igni Power or original Kawasaki CDI) when engine is not running eliminating the battery draw down<br>Igni Pro is a high power ignition with can be adjusted fully online with any Laptop wit all Windows System (expect new Vista) and easy to connect with USB<br>This allow you to react special to Your engine modification and can be change also later again<br>It will increase power with any modification even You stay on stock pipe<br>Operates also as a total loss system for superstock if use TBM Total Loss Flywheel.<br>Fit perfectly in original ignition box and stay full sealed like original system<br>Easy to install and included software<br>Please ask if we should programm already ignition to Your engine modification with no extra charge		';
artikel[73]='UL23001	ELECTRICAL	120.00	Racing Ignition Coil	../2008/SuperCoil.jpg				Stock Improved Coil for all year SX750/SXR800<br>Produce hotter stronger spark.<br>High Quality - Made in Japan		';
artikel[74]='21121-3713	ELECTRICAL	111.30	Coil Ignition	../Kawasaki/211213713.jpg				Kawasaki OEM Ignition Coil, fit all Years<br>Kawasaki Part No. 21121-3713		';
artikel[75]='27010-3760	ELECTRICAL	69.70	Switch, Starter	../Kawasaki/27103760.jpg				Kawasaki OEM Starter Relay, fit all Years<br>Kawasaki Part No. 27010-3760		';
artikel[76]='A27010-3760	ELECTRICAL	44.50	Aftermarket Switch, Starter	../Kawasaki/27103760.jpg				Aftermarket Starter Relay, fit all Years<br>Same fit then Kawasaki Part No. 27010-3760 Starter Relay		';
artikel[77]='92055-3712	ELECTRICAL	14.80	Generator Cover O-Ring	../2011/920553712.jpg				O-Ring Generator Cover<br>Kawasaki Part No. 92055-3712		';
artikel[78]='26006-0003	ELECTRICAL	3.60	Kawasaki Ignition Box Fuse	../2011/260060003.jpg				Kawasaki Ignition Box Fuse Part No. 26006-0003		';
artikel[79]='NGK	ELECTRICAL	4.00	NGK Solid Spark Plugs	../stuff/ngk.jpg		BR8ES|BR9ES		Solid Steel Terminal<br>BR8ES for all engine modification and stock and aftermarket heads		';
artikel[80]='TB05EM	ELECTRICAL	8.90	NGK Resistor Cover	../handling/tbm05em.jpg				Waterproof spark plug resistor covers for use on SX-R 800<br>Same 5K OHM like original		';
artikel[81]='stator	ELECTRICAL	339.00	Engine Stator	../motor/stator.jpg		SXR 2004-2011|SXR 2003|750 SX1992-2001		Original replacement Engine stator - same qualtiy then original<br>Made in Japan		';
artikel[82]='MP18	ELECTRICAL	15.00	Magneto Flywheel Puller	../2008/MP18.jpg				Fit all 750/800 Engines - Must have tool to get off any flywheel		';
artikel[83]='92038-001	ELECTRICAL	3.20	Key, Woodruff	../Kawasaki/92038001.jpg				Key Woodruff, Original Kawasaki<br>Kawasaki Part No. 92038-001		';
artikel[84]='TBM124	ELECTRICAL	499.00	TBM Total Loss  Light aluminum Flywheel	../motor/flywheel.jpg				TBM flywheel will give You amaziong throttle reponse and acceleration without loosing reliability<br>This flywheel operates as a total loss system (does not recharge battery)<br>In normal use the battery will strong enough to use all weekend with no charging<br>Total loss will give You the most weight saving and is ideal for racing, freeride and freestyle if You are looking for most throttle reponse		';
artikel[85]='TBM124-CHG	ELECTRICAL	599.00	TBM Charging  Light aluminum Flywheel	../2009/tbm-flywheel.jpg				TBM lightweight charging flywheel will give You amaziong throttle reponse and acceleration and still Your battery will recharge<br>This is the lightest charing flywheel on market and also the most durable made with highest grade aircraft aluminum.<br>EJSBA Limited class legal		';
artikel[86]='3270M	ELECTRICAL	120.00	Bendix Gear for SX-R800	../stuff/gear.jpg				Aftermarket Starter Gear (Bendix)<br>Fit all SX/SXI and all year SX-R800		';
artikel[87]='13101-3708	ELECTRICAL	378.70	Original OEM Kawasaki Bendix	../Kawasaki/131013708.jpg				Original Kawasaki Starter Gear (Bendix)<br>High Quality, Made in Japan.<br>Kawasaki Part No. 13101-3708		';
artikel[88]='C1092-NA	ELECTRICAL	135.00	Hiqh Torque Startermotor	../stuff/starter.jpg				Aftermarket Startermotor<br>Fit all SX/SXI and all year SX-R800		';
artikel[89]='21163-3714	ELECTRICAL	423.90	Original OEM Kawasaki Startermotor	../stuff/starter.jpg				Original Kawasaki Startermotor<br>High Quality, Made in Japan.<br>Kawasaki Part No. 21163-3714		';
artikel[90]='13091-3726	ELECTRICAL	14.90	Holder, Start Stop/Switch	../Kawasaki/130913726.jpg				Holder Switch bar clamp<br>Kawasaki Part No. 13091-3726		';
artikel[91]='32099-3725	ELECTRICAL	29.50	Case, Lower, Start/Stop Switch	../Kawasaki/320993725.jpg				Case Lower Switch<br>Kawasaki Part No. 32099-3725		';
artikel[92]='32099-3860	ELECTRICAL	22.80	Case, UP, Start/Stop Switch	../Kawasaki/320993726.jpg				Case Up Switch<br>Kawasaki Part No. 32099-3726		';
artikel[93]='32099-3818	ELECTRICAL	26.40	Case Front Start/Stop	../Kawasaki/320993818.jpg				Case Front Start/Stop<br>Kawasaki Part No. 32099-3818		';
artikel[94]='26011-3791	ELECTRICAL	32.90	Wire Lead, Starter 26011-3791	../2010/260113791.jpg				Original Kawasaki OEM Part No. 26011-3791		';
artikel[95]='26011-3927	ELECTRICAL	42.90	Wire Lead, Batterie 26011-3927	../2010/260113927.jpg				Original Kawasaki OEM Part No. 26011-3927		';
artikel[96]='26011-3921	ELECTRICAL	42.90	Wire Lead Ground, Battery 26011-3921	../2010/260113921.jpg				Original Kawasaki OEM Part No. 26011-3921		';
artikel[97]='YTX20L-BS	ELECTRICAL	99.95	Yuasa original Watercraft Battery	../2009/yuasa.jpg				Original Yuasa for Kawasaki SX-R800 all year (Also all year SX, SXI 750)<br>Maintenance-free design, tested to the extreme<br>Original Yuasa quality		';
artikel[98]='Optimate	ELECTRICAL	59.95	OptiMate 4	../2011/optimate4.jpg				Truly unique diagnostic battery optimiser for 12V lead-acid batteries up to 50Ah, whether sealed maintenance-free, gel, or "flooded" type with filler caps<br>Microprocessor control, deep-discharge diagnosis<br>Recovery and TURBO recovery, Unique charge optimisation and verification system<br>Automatic power loss test, 5 possible status test results<br>Energy-efficient, low heat rise<br>Sealed weather-proof housing, built-in replaceable mounting lugs		';
artikel[99]='7800	ELECTRICAL	474.80	Super B 7800 Lithium Ion starter battery	../2012/7800.jpg				Lightweight Lithium Ion starter battery, 1.3 kg kilogram<br>Replace the much heavier 14 to 20 Ah lead/acid battery<br>Recharges many times faster: within 5 minutes after starting your engine the battery will be recharged<br>Size(WxHxD) / 120mm x 95mm x 82mm<br>Longer service life: more than 5 years instead of 2 to 3 years<br>Has a low self-discharge rate<br>Recommended for SX-R800		';
artikel[100]='10P	ELECTRICAL	593.80	Super B 10P Lithium Ion starter battery	../2012/10P.jpg				Lightweight Lithium Ion starter battery, 1.75 kg kilogram<br>Replace the much heavier 20 to 35 Ah lead/acid battery<br>Delivers up to 600 Cranking Amps<br>Recharges many times faster: within 5 minutes after starting your engine the battery will be recharged<br>Size(WxHxD) / 120mm x 127mm x 82mm<br>Longer service life: more than 5 years instead of 2 to 3 years<br>Has a low self-discharge rate	<br>Recommended for 3cylinder with Total Loss system or Runabout Jetski	';
artikel[101]='SP	ELECTRICAL	97.60	Lithium Ion starter battery charger	../2012/SP.jpg				Lithium Ion battery charger 220V<br>Recommended for all super B batteries		';
artikel[102]='A2109-PFW	CONTROLS	27.50	Pro Atlantis Pro Wrist Lanyards	../stuff/58-2501-BLK.jpg		Kawasaki|Yamaha|hydrospace		Atlantis Pro Floating laynard will stay secure during the most strenuos riding, inlcuded racing<br>Used by most Pro riders since years		';
artikel[103]='L30XTH-G	CONTROLS	26.50	odi Jetski X-Treme Lock-On Grips	../control/odi-x.jpg		Black|Grey		odi Revolutionary Non-Slip Technology for wettest environments on earth<br>Lock-On grips eliminates grip twisting and slippage without need for ties and glues<br>Fit on all handlebars included UMI, RRP or star bars<br>This is the perfect grip and a Must Have for all jetskis.		';
artikel[104]='TLD	CONTROLS	27.50	Troy Lee Designs odi Jetski Lock-On Grips	../2011/tld.jpg		White|Red|Black		Grooved channels prevent mud and water buildup<br>Overmolded flap gives added protection on outside clamp<br>Unique undercut pads provide slip comfortable feel with maximum grip<br>Custom flanged design provides hand support with more usable grip surface<br>Laster etched reference marks on inside clamp simplify grip positioning on handlebar<br>Laser etched Troy Lee Designs logos on outside clamps		';
artikel[105]='HY-607XEP	CONTROLS	13.50	RRP Jetski Lock-On Grips	../2009/09grips.jpg				RRP Ruffian Lock-On Grips<br>Lock-On grips eliminates grip twisting and slippage without need for ties and glues<br>Fit on all handlebars included UMI, RRP or star bars<br>Unbeatable price		';
artikel[106]='HY-B	CONTROLS	49.95	Adjustable Finger Throttle with needle bearing	../2009/09throttle.jpg				Precision machined from aircraft grade aluminum feauturing a exclusive needle bearing pivot for smooth performance<br>Fully adjustable perch and ergonomically correct reduce hand fatigue.<br>No sharp edge prevent for injury and smooth control.<br>Black Anodized		';
artikel[107]='58-0982	CONTROLS	79.95	PJS Billet Throttle Lever	../stuff/UKA01521BK.jpg				Billet constructed throttle features nylon cable roller, nylon bushing and thrust washers, 3 cable throw positions, 6mm stainless steel bolts<br>This lever is specially designed to contour around your index finger<br>The narrow lining allows you to gain quicker response on hole shots without your middle finger getting in the way of a full pull<br>Use and prefer from all hydrospace racers		';
artikel[108]='TBM118B-BLK	CONTROLS	79.95	TBM Hi Performance Adjustable Finger Throttle	../tbm/lever.jpg				Precision machined from aircraft grade aluminum feauturing a bushing pivot, fully adjustable perch and ergonomically correct reduce hand fatigue<br>This is the best finger throttle for SXR800 on market		';
artikel[109]='58-0991	CONTROLS	13.80	Throttle Cable Adapter	../2009/adapter.jpg		Kawasaki|Yamaha|hydrospace		Stainless Steel throttle cable adapter for Kawasaki, Yamaha, hydrospace to use with all aftermarket throttle lever<br>Much stronger then other aftermarket Throttle adapter because of use Stainless Steel		';
artikel[110]='54012-3773	CONTROLS	69.95	Kawasaki Original Throttle Cable	../control/cable.jpg		OEM Carb|Aftermarket Carb		Original Kawasaki Throttle cable, best and highest quality<br>Made in Japan		';
artikel[111]='59401-3725	CONTROLS	34.40	Kawasaki Original Choke Cable	../2012/chokecable.jpg				Original Kawasaki Choke cable<br>Made in Japan		';
artikel[112]='HD-cable	CONTROLS	239.00	Heavy Duty extra strong Steering Cable	../control/steeringcable.jpg				Much stronger steering cable and a MUST have on all high horsepower SXR800<br>Included burly cable ends and nuts<br>Fit Kawasaki SX-R800 2003-2011		';
artikel[113]='59406-3776	CONTROLS	119.95	Kawasaki OEM Steering Cable	../control/59406.jpg				Kawasaki original SXR800 steering cable.<br>SX-R800 2003-2011 - all year		';
artikel[114]='HJF-BK	CONTROLS	69.95	Hot Products Watercraft Handlebar with Pad	../control/starbar.jpg		4°|0°		Fit on original and aftermarket steerings<br>High quality black anoized aluminum with bar pad		';
artikel[115]='RRP-BILLET	CONTROLS	999.00	RRP Billet Pole	../2011/rrp-billet.jpg		Red|Black		 RRP Billet adjustable handle pole<br>All billet construction for extreme durability and that high end performance look		';
artikel[116]='RRP-SET	CONTROLS	1275.00	RRP SX-R800 Handlepole Complete Kit	../control/RRP-SET.jpg		Green Pad|White Pad|Red Pad		Save money and buy as a kit!<br>Each complete kit includes RRP SX-R adjustable Pole, RRP Fatbar Steering, +50 Fatbar, RRP Steering Stopper, RRP Carbon Pad (color of Your choice) and all hardware to mount on all Year SX-R 800.<br>You will love the new handling with best Handlepole Conversion Set-Up You can buy worldwide.<br>New Grips not included - please order new grips		';
artikel[117]='50-B-F	CONTROLS	69.95	RRP Fat Performance +50 Handlebars	../RRP/bar.jpg				RRP +50 Fatbar will give You much better riding position for freeride and works perfect also for racing<br>Your body poition is much better and also more space for aggresive riding style<br>Dramaticaly improving<br>28.6mm clamping area - fit only together with RRP Fatbar steering		';
artikel[118]='BAR-END-EX	CONTROLS	32.40	RRP Fat Bar Extender	../2011/rrp-ex.jpg				RRP Bolted Bars adaptor easy to install will give you the option to extend your bars of 1 1/2 inches up to 4 inches		';
artikel[119]='STR-SYS-UNIV-F	CONTROLS	279.95	RRP Steering system for 28.6mm Fatbar	../RRP/steering.jpg		Black|Red|Green		RRP universal steering system is designed for use with the new RRP 28.6mm Fat bar<br>The innovative strong design and with the short steering plate You get perfect aggresive faster steering then any other system on market.<br>Using now already from most and fastest Pro riders<br>RRP Fatbar +50 not included		';
artikel[120]='SS-BE	CONTROLS	39.95	RRP Steering Rebuild Kit	../2009/rrp-rebuild.jpg				RRP Steering rebuild kit, comes with all needed bearing and O-rings		';
artikel[121]='HP-KAW	CONTROLS	799.95	RRP Adjustable Handlepole	../2006/rrp.jpg		Kawasaki|Yamaha|hydrospace		Rick Roy innovative adjustable Handlepole for all stand-up jetski<br>Extra strong design using 6061 T6 aluminum tubes.<br>Quickly adjustable in seconds to rider preference<br>Lighter than original handlepoles<br>Aftermarket steering system needed		';
artikel[122]='RRP-PAD	CONTROLS	279.95	RRP Carbon Chin Pad	../RRP/pad.jpg		Green|Red|White		RRP Carbon Chin Pad fit perfect with RRP handlepoles with the most beautiful design and higest quality in carbon		';
artikel[123]='ST-STOP-BL	CONTROLS	59.95	RRP Chin Pad Support & Steering Stop	../RRP/stopper.jpg		Black|Red		This steering stopper will also prevent the pole pad from crushing or getting ripped out from the handlepole<br>Must have for all freestyle and also freeride riders		';
artikel[124]='AST-PR-PAD	CONTROLS	49.95	RRP Protective Steering Pad	../2009/asr.jpg		Green|Red		Protective pad for 28.6 steering system.<br>Easy to bolt on for "AST" Advance steering system		';
artikel[125]='BR-KAW-2H	CONTROLS	349.95	RRP Pole Bracket 2Hole Design	../RRP/bracket.jpg				RRP Bracket is not also much stronger and still lighter then stock bracket, it also give the engine much more air without included any water<br>This will help special on high superstock engines a gain in speed and also freesyle or freeride riders can close original holes in hood for less water and still enough air for engine<br>Very innovative idea and design		';
artikel[126]='JL305	CONTROLS	49.95	Handle Pole HD Springs	../control/spring.jpg				Greatly reduces weight of stock handle pole up to 75% and reduces rider arm and shoulder fatigue<br>Made in Japan		';
artikel[127]='TBM104-T	CONTROLS	39.95	TBM Racing Tensioner	../2009/tbm-spring.jpg		Tall|Short		Greatly reduces weight of stock handlepole up to 75%<br>Mounts easlily in seconds		';
artikel[128]='Monti	HANDLING	179.95	Front Sponson for SX-R800	../handling/sponson.jpg				Get exact same front sponsons that Alberto Monti use on his winning SXR800 at 2008 World Finals in Pro Superstock<br>New full material molding - compressed polyurethane Made in Europe - Highest Quality on market<br>Faster turns, No submarine anymore in turns, Better and Easier control in race conditions.<br>Used by near all Pro Racer on Kawasaki SXR: 2008 Pro Ski World Finals Champion Alberto Monti,  Urbain (Zapapta hull), Goodchild, Bossche, Poret, Seles, Klippenstein (all hydrospace) and many other Pro Racer trust this shape and quality.<br>Will change and improve the handling on SX-R800 dramaticaly!<br>THE ORIGNAL WITH THE FINEST QUALITY<br>Detailed instruction and all screw included		';
artikel[129]='9220	HANDLING	26.50	Teroson 9220 Special Glue	../2010/9220.jpg				This is the perfect very strong glue for sponsons and many other parts on jetskis<br>Glue keeps elastic, possible to paint and fully salt water proof		';
artikel[130]='TBM100	HANDLING	199.95	TBM Racing Super Scoop	../handling/intake-tbm.jpg				TBM Racing Super Scoop keeps the pump loaded when the ski is on edge as is the case in hard cornering.<br>Much better pump loading in rough water, no top speed loss<br>Must have on any modificaion		';
artikel[131]='PRSGKAW800SXR	HANDLING	265.00	Skat Trak Stainless Steel Intake Grate	../handling/intake-st.jpg		Cut Wing|Double Wing		Only Intake grate in stainless steel on market, never break - never bend.<br>Much better hook-up<br>Better pump loading in rough water<br>Improve turning - giving better control.<br>Stop the boat sliding out<br>Easy to change - A MUST HAVE		';
artikel[132]='TBM123	HANDLING	259.95	New TBM Racing Signature Series SX-R Black Ride Plate	../handling/tbm-rp.jpg				New updated TBM Signature Ride Plate for all SX-R800<br>A subtle yet very noticeable improvement these 4 windows allow water to enter over the top of the plate when chopping the throttle creating added traction and grip in the turns.<br>This is very noticeable when passing other riders or crossing another riders wake.<br> It is also an improvement for the recreational rider that loves going out and carving turns all day		';
artikel[133]='W2	HANDLING	269.95	W2 NEW Racing Rideplate +70mm	../2011/w2.jpg				You search for ride plate with the most radical turning but still extremely stable in rough water even with Your fastest SX-R800 - then the answer is the new W2 ride plate<br>After buy and test all rideplates available all world, we start with the Takenoshita rideplate from Craftman and make it even better<br>We change and modified with the side windows that help for much more radical and improve turning and added traction and grip<br>No other plate on the market will let the SX-R800 turn so sharp and still total stable on fast straight and rough water<br>The V-End of this plate make also a big improve - it is like a fin from a fish - the nature give us the ideas<br>Another big improvement is also the mateial - we use aluminum that guarantees that every plate is exact straight and more durable. Final finish we use a rough black paint<br>This rideplate will change Your SX-R to the most radical turning jetski and improve Your lap times		';
artikel[134]='TBM101	HANDLING	119.95	TBM SXR 800 Rear Sponson	../tbm/tbm-sponson.jpg				TBM Racing’s SXR 800 Rear Sponsons, which enhance the handling of this already dominant ski.<br>Used at the 2003 World Finals by Tim Bushman and Factory Kawasaki, they have been widely accepted as one of the few bolt on handling components for the SXR that actually work.<br>Constructed of 6061-billet aluminum and use stainless steel inserts they come complete with all necessary hardware and instructions.<br>Tim Bushman states, At first glance these look like a very simple part, but we put extensive hours of testing into every aspect of the sponsons		';
artikel[135]='TBM120	HANDLING	399.95	TBM PRO Super Pump Cone	../tbm/superpumpcone.jpg				TBM New PRO Super Pump Cone<br>Due to the demands of Pro Racing Tim Bushmen have redesigned the Kawasaki Super Pump Cone to increase the strength and offer riders with the option to "tune" the pump for their particular set up or water conditions.<br>Included with new TBM PRO kit is the Super Pump Cone insert, a tail cone base that seals the pump and three different length tail cone tips.<br>The tail cone tips can be changed by simply removing one M6 bolt and replacing the tip with a different length to optimize your impeller and nozzle combination.<br>The short cone works well for Freestyle, Freeride and tight Closed Courses, while the medium and long tail cone works excellent for rough water hook up and amazing top speed.<br>Fit for all SX, SXI and SXR original Pumps - all year		';
artikel[136]='161-8000	HANDLING	59.50	R&D Pump Seal Kit	../handling/pumpseal.jpg				Pump Seal Kit stuffs up all those unwanted cavities in the original Kawassaki pump shoe that aid in producing cavitation.<br>Fit perfect in original OEM pump shoe and improve hook up<br>A MUST HAVE with all modification and improve even all complete stock boats.		';
artikel[137]='magnum	HANDLING	1834.00	Skat Trak Magnum Pump	../handling/magnum.jpg		140mm|142mm		This is the most important part to change on all fast and powerfull SX-R800<br>Maximum improve in hook up and handling - with setback also much more top speed and acceleration (On our limited a gain over 2 miles !!)<br>All our Magnum Pumps come with 12van and setback modification<br>Skat Trak Magnum Pump are made in stainless steel and come with two cooling outlets<br>140mm works best on most modification, 142mm for high powered engines only.<br>Skat Trak impeller included		';
artikel[138]='driveshaft	HANDLING	464.00	Skat Trak Long Drive Shaft	../handling/driveshaft.jpg				Skat Trak long Drive Shaft is a must on all Skat Trak Magnum Setback pump if You want use any aftermarket impeller togehter with this pump<br>Our secret setup on limited ski is Magnum Pump, Drive Shaft and Solas Impeller from Impros		';
artikel[139]='pumpkit	HANDLING	85.50	Pump Repair Kit Original Pump	../handling/bearing.jpg				Complete Repair Kit with Bearing, Shaft and all Seals and O-ring<br>Fit all SX, SXI 750 and SX-R 800 2003-2011 		';
artikel[140]='39145-3735	HANDLING	26.90	Trim Seal	../Kawasaki/391453735.jpg				Original Kawasaki Trim Seal for Skat Trak or Original Pumps<br>Kawasaki Part No. 39145-3735		';
artikel[141]='13280-3730	HANDLING	215.50	Shaft House Kawasaki OEM 13280-3756	../2010/132803730.jpg				Kawasaki OEM Part No. 13280-3756 		';
artikel[142]='54-3027	HANDLING	28.00	Shaft House Repair Kit	../2009/54-3027.jpg				Shaft House Seal and Bearing Repair Kit with all seals and bearing included<br>Fit all 650,750 and 800 Kawasaki Jetski 		';
artikel[143]='54-8000	HANDLING	42.50	Jet Pump Repair Kit	../2009/54-8000.jpg				Jet Pump Bearing and Seal Repair Kit<br>Fit all 750, 800 Kawasaki Jetski Pump		';
artikel[144]='92045-3706	HANDLING	25.80	Kawasaki OEM Pump Bearing	../handling/92045.jpg				Kawasaki OEM Pump Bearing fit also in Skat Trak Magnum m pump<br>Two bearing are need for complete pump  		';
artikel[145]='SL009	HANDLING	9.90	Replacement Impeller Rubber Nose Boot	../2010/SL009.jpg		Solas|Skat Trak|OEM Kawasaki		Replacement Impeller Nose Boot for Solas Dynafly, Skat Trak Swirl and Kawasaki OEM Impeller		';
artikel[146]='impros	HANDLING	379.95	Impros Custom Bend Set Back Impeller	../handling/solas.jpg		13/20|13/21|13/23		Impros Set Back impellers are custom pitched to maximize performance & engine rpm specific applications<br>These Solas Dynafly impellers are machined - 5mm to set them closer to the pump vanes, which maximizes pump hook up and speed.<br>The impellers fit right into stock SXR pump or all 140mm Magnum pump with long driveshaft.<br>This is one secret of our fastest race ski since many years on different Championship		';
artikel[147]='solas	HANDLING	289.95	Solas Blueprinted Dynafly Impeller	../handling/solas.jpg		13/22|14/23|15/24		Solas Dynafly Blueprinted stainless steel impeller with new blade geometry have excellent holeshot acceleration, special on choppy water and gain in top speed<br>Fit in Original Kawasaki OEM Pumps, TBM Pro Pump Cone and also Skat Trak Magnum Pump 140mm		';
artikel[148]='SK4075SW	HANDLING	299.95	Skat Trak C-75 Swirl Impeller	../handling/skattrack.jpg		9/17|13/18|14/19|13/20		Skat Trak Swirl stainless steel impeller with different pitch to set up with Your engine modification<br>We can order any pitch or size from Skat Trak also Long Nose type		';
artikel[149]='DS35	HANDLING	19.60	Impeller Wrench	../handling/ds35.jpg				Fit for all original and aftermarket impeller for all SX/SXI and SX-R 800 all year		';
artikel[150]='PRNKAW800	HANDLING	792.00	Skat Trak Drop Nozzle Kit	../handling/trim-skattrack.jpg		80/83|81/84|82/85|83/86		A must if you race your Kawasaki 800 SX-R closed course.<br>It allows you to drop or trim the steering nozzle with a manually operated lever.<br>Skat Trak new Drop Nozzle Kit is compatible with OEM or all Skat Trak Magnum Pump System.<br>The kit includes an alluminum extended Steering Nozzle, manual Trim Cable and all hardware for mounting. (Lever sold separately)<br>Recommend nozzle size:  LTD 80/83 or 81/84 - SS 82/85 or 83/86mm size		';
artikel[151]='HY01525B	HANDLING	79.95	Trimlever	../2009/09trim.jpg				Billet aluminum trim lever for trim tab and quick turn nozzle.<br>Very small design with no sharp edges and all material are anodized black aluminum or stainless steel to prevent corrosion<br>Black Anodized		';
artikel[152]='trimcable	HANDLING	98.00	Skat Trak Trim Cable	../handling/trimcable.jpg				Skat Trak replcacement Stainless Steel Trim Cable<br>Fit also many other Trim stystem		';
artikel[153]='PD1300	BILGE	39.95	Versiplug Drain System for SX-R	../2009/versiplug.jpg				The automatic drain solution.<br>The reliable self-balling drain plug fit special for SX-R 800 drain plug and install in one minute<br>New - Black anodized		';
artikel[154]='57-4065	BILGE	29.95	Duck Bill Drain System	../stuff/quickdrain.jpg				Simple and clean, drains water from hull under acceleration<br>Complete kit with billet aluminum mounting plate, duck bill flapper and zip tie<br>Easy to mount		';
artikel[155]='57-4055	BILGE	26.50	Duck Bill Flapper only	../stuff/rubber.jpg				Replacement Duck Bill Flapper.<br>Fit also on hydrospace and with better rubber material		';
artikel[156]='660-8000	BILGE	29.95	R&D Rule Mount Bracket for SX-R 800	../stuff/halterung-bilge.jpg				The R&D Bilge Pump Mount Bracket bolts securely to the hull developing a secure surface to hold all Rule Electric Bilge Pump<br>Fit inside in SX-R hull with no modification directly near original drain system		';
artikel[157]='25D	BILGE	34.80	Rule Bilge Pump 500GPH	../stuff/rule.jpg				Rule Electric Bilge Pump - must have for freestyle, freeride and racing to keep Your SX-R 800 dry on wildest tricks and roughest race conditon at sea		';
artikel[158]='57-3030	BILGE	9.95	Bilge Electrical Parts Kit	../stuff/fuse.jpg				Kit contains waterproof fuse holder, 5amp fuse, ring terminal, shirnk tubing		';
artikel[159]='57-4008x2	BILGE	5.60	Rule Flexible Plastic Hose	../stuff/rule-hose.jpg				Rule flexible Bilge Plastic Hose<br>Comes in exact needed length and fit with Rule and aluminum Bilge Fittings		';
artikel[160]='57-4006	BILGE	9.80	Rule Plastic Strainer Base	../2009/57-4006.jpg				Replacement Blue Plastic Strainer Base, fit all Rule Bilge Pumps		';
artikel[161]='57-3020	BILGE	49.95	Waterproof Panel Mount Bilge Switch	../stuff/jl-switch.jpg				3-Way Panel Mount Switch connects to two electronic accessories for power control<br>High quality and waterproof<br>Made in Japan		';
artikel[162]='57-3003	BILGE	99.95	Waterproof Standard Bilge Switch with Mounting bracket	../stuff/hot-switch.jpg				Waterproof on/off switch<br>Extra long cable for fit on handlebar.<br>Mounting bracket is machined from billet alloy and is anodized black to prevent corrison<br>Easy to mount under original Kawsaski Start/Stop switch		';
artikel[163]='57-4015	BILGE	17.50	Bilge Fitting	../stuff/bilge-fitting.jpg		Black|Silver		Straight Bilge Fitting.<br>Aluminum trough hull outlet fitting		';
artikel[164]='JS-02000	BILGE	15.50	UMI 90° Bypass Fitting	../stuff/fitting.jpg		Black|Silver		Water bypass fittings increase engine performance by diverting from water from cylinder head to the bypass fittings<br>This fittings are made with aluminum and allows more water flow than original SX-R rubber fitting<br>90° anglded like orginal fitting		';
artikel[165]='53-9928	BILGE	6.00	Water Line Hose (Blue) 	../motor/waterline.jpg		3/8"|1/2"		Flexibility, Durability, abrasion resistance, light weitht, chemical resistance, high pressure capability waterline blue<br>Waterline is sold per 1 Meter 		';
artikel[166]='52-3118	BILGE	54.95	Jet Works Flow Control Valve	../stuff/jetwork.jpg				The Flow Control Valve provides improved throttle response and much quicker starts by drying out your waterbox at low rpm and idle speeds<br>The Flow Control Valves allows unrestricted water flow to the Stinger for better top speed and control the amount of water at low speeds for better throttle response.<br>Works good with Factory Wet Pipes - not used on Dry Pipe modification.		';
artikel[167]='59-4017	BILGE	7.40	Squeeze On Stainless Steel Clamp (10pcs/pk) 	../2009/594017.jpg		3/8"|1/2"		High quality stainless steel squeeze on clamps for 3/8 or 1/2 waterlines<br>Quick and simple to install<br>Crimp on clamps are extremely strong and do not break or come loose like conventional hose clamp<br>Packing included 10 pieces. 		';
artikel[168]='64-0030	BILGE	2.20	Stainless Hose Clamp	../2011/640030.jpg				Stainless Hose Clamp for 1/2 and 3/8 waterline<br>8-22mm - High quality		';
artikel[169]='MR-SXR-008	BODY	13.50	Kick Tail	../carbon/c10.jpg				Ridematten Keil will give You a better grip of your jetski in turns and is easy to glue on original or aftermarket mats<br>Material is easy to cut and grind with sandpaper.<br>Most pro riders use two kick tails together		';
artikel[170]='KSXR105	BODY	255.00	JETTRIM SX-R800 Rail Caps	../Jettrim/siderails.jpg				JETTRIM composite siderails fit perfect instead of weak and slippery original rubber rails<br>Come also alone with a rubber seal and this are the best looking and fitting siderails on market		';
artikel[171]='KSXR106	BODY	135.00	JETTRIM Rails Side Mat with Long Lifter	../Jettrim/sidemat.jpg		Black|Black-Green band|Black-Red band|Carbon Black with Green Stick		Jettrim Rails Side mat with lifter are specially design for all composite rail caps and give You the most possible grip<br>Jettrim exclusive extra strong and long lifter		';
artikel[172]='JT-sidemat	BODY	99.95	JETTRIM Side Mat with Lifter	../Jettrim/siderails-lifter.jpg		Black|Black-Green band|Black-Red band		Jettrim Side mat with lifter give You the most possible grip.<br>Jettrim exclusive extra strong and long lifter		';
artikel[173]='KSXR101	BODY	95.00	JETTRIM Slotted Bottom Kevlar mat	../Jettrim/bottommat.jpg		Black|Black-Green band		JETTRIM special Slotted Bottom mat design gives You the ultra Grip<br>Special Kevlar material, very durable		';
artikel[174]='JT-bottom	BODY	18.00	JETTRIM Under Mat	../2011/jt-bottom.jpg				JETTRIM Under Mat soft<br>Use to put under JETTRIM mats to make more soft		';
artikel[175]='TS401	BODY	15.95	Handle Pole Shock Pads	../control/pad.jpg		OEM Hood Pad|3DR Carbon Hood Pad		Hydro Turf Pole Shock Pads prevent engine hood and handlepole from damage when handlepole is dropped<br>Gives also a higher body position		';
artikel[176]='HT68K	BODY	115.00	Hydro Turf Mat with Kick Tail	../control/hdmattekick.jpg				Hydro Turf mat kit are designed to replace worn or damaged provide better traction and better resistance materials then stock mat kit<br>This mat kit comes with kicker included		';
artikel[177]='HT68	BODY	99.00	Hydro Turf Mat 	../control/hdmatte.jpg		Black|Grey		Hydro Turf mat kit are designed to replace worn or damaged provide better traction and better resistance materials then stock mat kit		';
artikel[178]='SHT40MG-BLK	BODY	93.60	Hydro Turf Mat Sheet Black 	../2011/sht.jpg				Hydro Turf molded groove 156x101cm mat sheet		';
artikel[179]='JS-03200	BODY	17.50	Aluminum Bow Eye Bushing	../stuff/boyeyes.jpg		Black|Silver		Change Your original weak plastic bow eye with this aluminum bushing		';
artikel[180]='27016-3703	BODY	133.50	Lock Assy	../Kawasaki/270163703.jpg				Original Kawasaki Hood Lock-Assy for all Years<br>Kawasaki Part No. 27016-3703		';
artikel[181]='latch	BODY	69.95	Stainless Steel Hood Latch	../2006/latch.jpg				Much stronger then every weak aluminum hood latch on market and prevent comeing loose engine hood		';
artikel[182]='HY-HH	BODY	48.00	Aftermarket Billet Hood Hooks	../2009/09hood.jpg				A direct replacement for the weak and easy broken Kawasaki OEM hood latches.<br>Made from 6061 billet aluminum elemating the chance of a failure that can lead to the engine hood coming loose<br>Black anodized		';
artikel[183]='QL-01	BODY	24.00	Quick Loop	../2009/loop.jpg				A flexible tow loop is required for all watercraft of all local races and international EJSBA and IJSBA events		';
artikel[184]='39027-3745-6Z	BODY	79.50	Bumper Front	../Kawasaki/3902737456z				Original Kawasaki Bumper Front<br>After we test on our race jetski different front bumper in Fiber and Carbon, we switch back to original Kawasaki soft plastic bumper<br>Fit perfect with TBM side Race Bumpers<br>Kawasaki Part No. 39027-3745-6Z		';
artikel[185]='TBM117	BODY	96.00	TBM Racing Race Bumpers	../2006/tbm-bumper.jpg				TBM Racing Race Bumpers simply replacing your expensive stock bumpers, increase the lean angle of your ski<br>Also a gain in top speed on stock boat was found<br>Easy and fast to mount		';
artikel[186]='TBM103	BODY	89.95	TBM Racing Billet Drive Line Coupler	../tbm/coupler.jpg				Billet Drive Coupler Set<br>Much stronger then original Kawasaki Coupler<br>Lighweight with extra hole		';
artikel[187]='92075-520	BODY	51.90	Kawasaki OEM Rubber Damper	../shop/damper.jpg				Original Kawasaki Rubber Damper<br>Part No. 92075-520		';
artikel[188]='A92075-520	BODY	28.00	SX-R800 Rubber Damper	../shop/damper.jpg				Aftermarket SX-R800 Rubber Damper - Made in Italy		';
artikel[189]='TBM110	BODY	79.95	TBM Racing Billet Exhaust Flange	../tbm/exflange.jpg				Replacement for original Kawasaki Exhaust Flange		';
artikel[190]='TBM105-KFN	BODY	89.95	TBM Racing Billit Gas Cap Filler Neck	../2009/tbm-filler.jpg				Provides a stronger seal from water entering the fuel tank		';
artikel[191]='SE-star	BODY	75.00	Speedmagic Star Billit Gas Cap	../2008/star-cap.jpg		Black|Silver		Speedmagic Billet Aluminum Gas Cap		';
artikel[192]='11009-3020	BODY	9.30	Seal Gas Cap	../2011/110093020.jpg				Kawasaki OEM Rubber Gas Cap Seal<br>Fit also all aftermarket gas cap<br>Kawasaki Part No. 11009-3020		';
artikel[193]='57-1142	BODY	49.80	Motor Mounts Kawasaki SX-R800	../2010/enginemount.jpg				Monkey Grip Motor Mounts are designed to be stronger than OEM mounts.<br>This combination of durability and performance make this engine motor mounts the right choice<br>Fit all year Kawasaki SXR800, 750 SX/SXI, all 650 Kawasaki		';
artikel[194]='KASRC0608	BODY	109.00	Hood Insert Kit for Factory Drypipe 800 SX-R 	../stuff/hoodinsert.jpg				Must use for original hood if You mount FP Dry Pipe in Your SXR800<br>Included all hardware and glue		';
artikel[195]='3DR	BODY	990.00	3DR Superstock Light Engine Hood	../carbon/3dr.jpg				Dramaticaly saving weight - only 3.9KG-  Made from 3DR<br>More air, improve power and less water go inside Your hull because of design<br>Come already with original rubber seal mounted and complete hood is change in five minutes<br>Better and more aggresive engine sound is also a plus and reactional rides and racers like<br>Hood fit like original hood and come already with enough space for Factory Dry Pipe or TBM Twin Pipe, no cutting out like original hood needed		';
artikel[196]='SXR020	BODY	159.00	SX-R Front Nose Black	../2012/frontnose.jpg				Cool Looking Front Nose - same that we use on all our Racing SX-R<br>Not only that your SX-R 800 will look totally different, it prevent Your SX-R from nose diving (bigger volume on front)<br>Black painted - easy and fast to mount		';
artikel[197]='16031-3985	BODY	169.60	Float, Fuel Tank	../2011/160313985.jpg				Float Fuel Tank, Kawasaki Part No. 16031-3985		';
artikel[198]='JS-02000	BODY	15.50	UMI 90° Bypass Fitting	../stuff/fitting.jpg		Black|Silver		Water bypass fittings increase engine performance by diverting from water from cylinder head to the bypass fittings<br>This fittings are made with aluminum and allows more water flow than original SX-R rubber fitting<br>90° anglded like orginal fitting		';
artikel[199]='53-9928	BODY	6.00	Water Line Hose (Blue) 	../motor/waterline.jpg		3/8"|1/2"		Flexibility, Durability, abrasion resistance, light weitht, chemical resistance, high pressure capability waterline blue<br>Waterline is sold per 1 Meter 		';
artikel[200]='52-3118	BODY	54.95	Jet Works Flow Control Valve	../stuff/jetwork.jpg				The Flow Control Valve provides improved throttle response and much quicker starts by drying out your waterbox at low rpm and idle speeds<br>The Flow Control Valves allows unrestricted water flow to the Stinger for better top speed and control the amount of water at low speeds for better throttle response.<br>Works good with Factory Wet Pipes - not used on Dry Pipe modification		';
artikel[201]='59-4017	BODY	7.40	Squeeze On Stainless Steel Clamp (10pcs/pk) 	../2009/594017.jpg		3/8"|1/2"		High quality stainless steel squeeze on clamps for 3/8 or 1/2 waterlines<br>Quick and simple to install<br>Crimp on clamps are extremely strong and do not break or come loose like conventional hose clamp<br>Packing included 10 pieces 		';
artikel[202]='64009	BODY	6.00	Brass Fitting 	../stuff/fittings.jpg		3/8"Hose 90°|3/8"Hose Straight|1/2"Hose 90°|Plug		Brass Fitting for Engine Head, Exhaust and Pumps 		';
artikel[203]='slippery	ACCESSORIES	89.50	New Slippery Liquid Race Boot	../2009/race-boot.jpg		X-Small|Small|Medium|Large|X-Large|XX-Large		New Slippery Lace up the Liquid Race Boot and feel the performance.<br>Completely redesigned to exceed the performance demands of racers and riders alike, the Liquid Race Boot is pure performance.<br>The molded outsole provides superior traction, support, and stability that cant be found in lightweight soles<br>This is the ultimative Jetski shoe - for hot and cold weather 		';
artikel[204]='H2O	ACCESSORIES	59.95	Oakley H2O Water Google	../stuff/h2oframe.jpg		Black Frame		Special Oakley Jetski Water goggle<br>Special Anti Fog lenses<br>Special Foam for water sport using<br>Best Jetski goggle on market		';
artikel[205]='70-4040	ACCESSORIES	29.95	Google Grip (set of two included)	../stuff/googlegrip.jpg		Clear|Black|Silver		Aligns riders preferred google strap positioning on helmet<br>Prevents strap from shifting or slipping off helmet<br>Simply pinch and lift strap for easy removal<br>Tranparent VHB Peel&Stick application with alcohol prep pad for easy and fix installing		';
artikel[206]='CLM7	ACCESSORIES	99.90	Jetski Back Protector	../2011/clm.jpg				Moveable 30° right and left Jetski Backprotector<br>Without any metal, can not rust and will not get more heavy in water<br>CE Certificated - Made in Italy		';
artikel[207]='jettribe	ACCESSORIES	169.95	Jettribe SX-R800 Watercraft Cover Black	../stuff/jettribe.jpg				All seams are double-stitched for superior strength<br>All panels are finished with nylon binding.<br>Completely waterproof<br>Internal piping to hold rigid shape<br>Exclusive engineered tough and durable Dobby (CFM) material.<br>Front nose pin and front lower chin are reinforced with PVC abrasion resistant material.<br>Soft Nytex inside liner<br>Zippered gas flap<br>Zipper pull rubber garage<br>YKK zippers are rustproof.<br>Tough, oversized, 1.5” dual nylon webbing for side and rear tie downs<br>Tie downs can attach or release with big 1.5 snap Duraflex buckles.<br>Finished off with rust resistant grommet for added strength<br>Tie downs are sewn with X box over tough PVC material.<br>Fat adjustable shock cords are sewn full-length on the watercraft along the hem.<br>Spring loaded and fully adjustable toggle		';
artikel[208]='DP-58	ACCESSORIES	19.90	Dry Pak iPhone Case	../2011/dp58.jpg				Keep Your Electronic, iPhone, Keys, GPS absolut dry and also foats on water<br>200x125mm case size		';
artikel[209]='IPWP-001	ACCESSORIES	29.90	Waterproof Digital Audio Player Case	../2011/ipwp.jpg				Enjoy Your music while You are Waterside<br>Protect and keep dry Your iPod, iPhone - audio gear<br>Waterproof to 3m, keep the dust and sand out<br>Floats savely if dropped in the water<br>The case comes complete with built-in externial earphone jack, provides a clear panel for operating your iPod, iPhone<br>90x186mm case size		';
artikel[210]='Deko-Green	ACCESSORIES	119.00	Race Team Graphic Kit Kawasaski SXR800	../2009/JETSKI-1.jpg				Our Race Team Sticker Kit included all sticker like You see on Photo<br>Made with highest quality material<br>You can choose Your race number - please email us<br>Color sticker Kawaski Racing GREEN/BLACK		';
artikel[211]='Deko-Red	ACCESSORIES	119.00	Race Team Graphic Kit Kawasaski SXR800	../2009/JETSKI-2.jpg				Our Race Team Sticker Kit included all sticker like You see on Photo<br>Made with highest quality material<br>You can choose Your race number - please email us<br>Color sticker RED/BLACK		';
artikel[212]='59-3450	ACCESSORIES	49.95	VP Racing Fuel Jug	../stuff/jug.jpg		White|Blue|Red		The most unique and inovative design.<br>Store to 22 liter maximum - race or pump station fuel<br>Stay clean and can not rust inside		';
artikel[213]='59-3456	ACCESSORIES	7.50	VP Filler Hose	../stuff/jug-ventil.jpg				Upgrade Your VP Jugs with a filler hose to make refuelling Your Jetski easier and make spills a thing of past		';
artikel[214]='CHDMH-001	ACCESSORIES	299.95	HD GoPro Motorsports Hero Kit	../2011/gopro.jpg				GoPro’s HD Motorsports HERO is the world’s highest performance 1080p HD on board video and still photo racing camera<br>Professional quality 1080p, 960p, and 720p HD resolutions records the action at 30 frames per second (60 fps in 720p)<br>The HD Motorsports HERO easily mounts to any helmet, motorcycle, ATV, car, plane, jet ski, boat, snowmobile or other vehicle<br>The camera’s quick-release mounting design makes it easy to re-position the camera around your vehicle for professional quality HD video from several angles		';
artikel[215]='PET-3200R	ACCESSORIES	59.95	Hour/Tach Meter	../2009/pet3200.jpg				Works from the engines HT lead to record cumulative running time, with reset function.<br>The smallest, lightest digital hour meter on the market<br>With reset function, easy to use<br>Fully waterproof		';
artikel[216]='PET-2000DXR	ACCESSORIES	175.00	PET 2000-DXR Tachometers	../stuff/pet2100.jpg				PET2000DXR messures exact engine RPM, store maximum RPM, total cumulative operating time, resetable cumolative operating time<br>Made in Japan<br>A Must for all engine tuner<br>Fully waterproof		';
artikel[217]='59-4005	ACCESSORIES	168.00	AC Racing Beach Stand	../stuff/acracing.jpg				Thick wall tubing and heavy gauge angle aluminum construction<br>Excellent durability also in salt water		';
artikel[218]='J130	ACCESSORIES	760.00	Factory Zero Jet Launcher	../stuff/j130.jpg				Factory Zero - The best jet Launcher for Stand-Up Ski world wide<br>Quick and easy assembly and disassembly that does not require any tools<br>No nuts and bolts, Just pull and push Hitch Pins and assembly and disassembly is complete in just tow minutes.<br>A special angle handle design makes it easy to launch and load a stand up watercraft<br>Very high quality marine aluminuim are in use and full anodized, all hardware is stainless steel, wheel bearing are ceramic.<br>Nothing can rust - every single part is later possible to order and You will have this jet launcher all live in use<br>Made in Japan		';
artikel[219]='monster-tent	ACCESSORIES	239.00	Easy Up Monster Tent 3x3m	../2011/monster-tent.jpg				Quick and easy set up, as a "home base" for a day at the beach, Easy Up Tent 3x3 meter<br>Black powder coated Frame and Black Canopy Top with Monster Energy Logo<br>Included Roller bag for easy transport		';
artikel[220]='motul-800	CHEMICAL	13.50	Motul 800 Offroad	../stuff/motul.jpg				Full syntetic high performance race 2stroke oil - double ester base<br>Motul 800 was developed for the leading factory teams to ensure maximum engine<br>This is the best two stroke oil and also special to use with jetski engines in water.<br>You will have much longer engine live and engine stay complete clean<br>Pre-mix only<br>1 liter can		';
artikel[221]='motul-ezlube	CHEMICAL	6.80	Motul E.Z Lube Multi-protect 	../motul/ezlube.jpg				Multi-use lubricant, Anti-corrosion, anti-humidity, preventing jamming<br>Protects against corrosion with a protective film, all parts on Your Jetski<br>Prevents humidity all Electric circuitsPrevents jamming<br>Nuts, cables, oxidised mechanical systems<br>Salt water tested<br>Spray 400 ml		';
artikel[222]='motul-grease	CHEMICAL	6.40	Motul Tech Grease 300  	../motul/grease.jpg				Tech Grease 300 semi-synthetic formula provides superior heat and corrosion resistance<br>Highly recommended on all screw and nuts mount in Jetski to protect against corrosion<br>Temperatures for use : –30°c to 200°c<br>Complex lithium soap based with Extreme pressure additive – NLGI 2<br>200 gramm Tube		';
artikel[223]='motul-clean	CHEMICAL	6.30	Motul Cleaning Spray 	../motul/clean.jpg				Super powerful non-chlorinated degreaser for all mechanical system, electrics and spark plugs<br>Spray 400 ml		';
artikel[224]='motul-fuelsystem	CHEMICAL	7.50	Motul Fuel System Clean 	../motul/fuelsystem.jpg				MOTUL FUEL SYSTEM CLEAN provides a perfect lubrication during cleaning process, winter storage, helps against condensation in the fuel system, gumming in the carburettor and prevents removed micro-particles from depositing like happen with old fuel<br>Can 75 ml		';
artikel[225]='motul-shine	CHEMICAL	10.90	Motul Shine and Silicone clean 	../motul/shinego.jpg				Silicon based Spray to protect all plastic parts in Jetski, waterlines, bushings on handlepole and give also a special shine on all paintwork<br>Spray 400 ml		';
artikel[226]='motul-wash	CHEMICAL	10.90	Motul Wash and Wax 	../motul/wash.jpg				Wash and Wax Dry Cleaner - cleans and shines up all surfaces in depth without using any water<br>Removes dirt and others stains and protect all jetski hull parts and paints without any water<br>Easy to use, leaves a protective wax film for extended effectiveness<br>Spray 400 ml		';
artikel[227]='9220	CHEMICAL	26.50	Teroson 9220 Special Glue	../2010/9220.jpg				This is the perfect very strong glue for sponsons and many other parts on jetskis<br>Glue keeps elastic, possible to paint and fully salt water proof		';
artikel[228]='HSR-IC	HYDROSPACE	1230.00	High Performance Racing Intercooler	../2011/HSR-IC.jpg				High Power Intercooler is very good for 140-160-180 HP kit and it works much better than the original intercooler or other aftermarket , it will give a better performance at low-mid and top-end RPM, also on 110hp is very good<br>The support stainless steel bracket was put in a lower position for a better center of gravity<br>The air flow has been re-shaped for a crispy throttle response<br>Another new feature is the internal element , they are same as the ones used in lots of teams at the world super-bike motorcycle championship and GP as well<br>Easy bolt on modification, no other modifcation needed - Higher horsepower guaranteed<br>This intercooler is a must for a fast holeshot 		';
artikel[229]='S4-Sponson	HYDROSPACE	179.95	hydrospace S4 Front Sponson	../handling/sponson.jpg				Get exact same front sponsons that Poret, Bossche, Klippenstein and many other Pro S4 racer use<br>New full material molding - compressed polyurethane Made in Europe - Highest Quality on market<br>Faster turns, No submarine on front heavy S4 anymore, Better and Easier control in race conditions.<br>Will change and improve the handling on hydrospace S4 dramaticaly!<br>Detailed instruction and all screw included.		';
artikel[230]='HD-HSRcable	HYDROSPACE	269.00	hydrospace Heavy Duty extra strong Steering Cable	../2011/HSR-HD.jpg				Special Much stronger hydrospace steering cable that will never break again<br>Comes with the updated steering heim fittings<br>Fit all year hydrospace S4		';
artikel[231]='L30XTH-G	HYDROSPACE	26.50	odi Jetski X-Treme Lock-On Grips	../control/odi-x.jpg		Black|Grey		Get off the cheap China rubber grips before You loos from bars<br>odi Revolutionary Non-Slip Technology for wettest environments on earth<br>Lock-On grips eliminates grip twisting and slippage without need for ties and glues<br>Fit on all handlebars included UMI, RRP or star bars<br>This is the perfect grip and a Must Have for all jetskis.		';
artikel[232]='TLD	HYDROSPACE	27.50	Troy Lee Designs odi Jetski Lock-On Grips	../2011/tld.jpg		White|Red|Black		Grooved channels prevent mud and water buildup<br>Overmolded flap gives added protection on outside clamp<br>Unique undercut pads provide slip comfortable feel with maximum grip<br>Custom flanged design provides hand support with more usable grip surface<br>Laster etched reference marks on inside clamp simplify grip positioning on handlebar<br>Laser etched Troy Lee Designs logos on outside clamps		';
artikel[233]='HY-607XEP	HYDROSPACE	13.50	RRP Jetski Lock-On Grips	../2009/09grips.jpg				RRP Ruffian Lock-On Grips<br>Lock-On grips eliminates grip twisting and slippage without need for ties and glues<br>Extra thin that most hydrospace rider likes		';
artikel[234]='A2109-PFW	HYDROSPACE	27.50	Pro Atlantis Pro Wrist Lanyards	../stuff/58-2501-BLK.jpg		hydrospace|Yamaha|Kawasaki		Atlantis Pro Floating laynard will stay secure during the most strenuos riding, inlcuded racing<br>Used by most Pro riders since years		';
artikel[235]='TBM118SH-BLK	HYDROSPACE	79.95	TBM hydrospace Hi Performance Adjustable Finger Throttle	../tbm/lever-hydrospace.jpg				TBM throttle lever specifically designed to work with the Hydrospace S4 watercrafts<br>Precision machined from aircraft grade aluminum feauturing a bushing pivot, fully adjustable perch and ergonomically correct reduce hand fatigue.<br>Fit special for hydrospace S4		';
artikel[236]='58-0982	HYDROSPACE	79.95	PJS Billet Throttle Lever	../stuff/UKA01521BK.jpg				Billet constructed throttle features nylon cable roller, nylon bushing and thrust washers, 3 cable throw positions, 6mm stainless steel bolts<br>This lever is specially designed to contour around your index finger<br>The narrow lining allows you to gain quicker response on hole shots without your middle finger getting in the way of a full pull<br>Use and prefer from all hydrospace racers		';
artikel[237]='002-055-06	HYDROSPACE	69.95	Yamaha Type Throttle Cable - fit all Hydrospace S4	../superjet/sj-cable.jpg				Smoother and ligther throttle feel with updated Throttle Cable<br>Fit for hydrospace S4 - some model year need also 6mm cable adapter<br>Better quality as original hydrospace cable		';
artikel[238]='58-0991	HYDROSPACE	13.80	Throttle Cable Adapter	../2009/adapter.jpg		S4 2005-2008 6mm|S4 2009-2010 8mm		Throttle cable adapter hydrospace S4 to use with all aftermarket throttle lever		';
artikel[239]='7100	HYDROSPACE	13.80	Motul 7100 10W60 Engine Oil 	../motul/7100.jpg				100% synthetic Motul 7100 10W60 Engine Oil for Hydrospace Engines<br>Ester-Technology<br>Anti-wear additives and shear resistance for perfect gear protection and life time<br>10W60		';
artikel[240]='MR07398	HYDROSPACE	129.95	Marine Fluid Extractor	../s4/oil.jpg				Empties oil in 15 pumps or less<br>Extracts warm or cold engine oil.<br>Pressure relief valve easy transporation and storage<br>Single-hand-ease effortless operation.<br>Delivers gulp-free, mess free performance.<br>Complete adapter kits included<br>Must Have for oil change on all hydrospace		';
artikel[241]='50-B-F	HYDROSPACE	69.95	RRP Fat Performance +50 Handlebars	../RRP/bar.jpg				RRP +50 Fatbar will give You much better riding position for freeride and works perfect also for racing<br>Your body poition is much better and also more space for aggresive riding style<br>Dramaticaly improving<br>28.6mm clamping area - fit only together with RRP Fatbar steering		';
artikel[241]='RRP-SET-HS	HYDROSPACE	1375.00	RRP hydrospace S4 Handlepole Complete Kit	../control/RRP-SET.jpg		White Pad|Red Pad		Complete kit includes RRP hydrospace S4 adjustable Pole, RRP Fatbar Steering, +50 Fatbar, RRP Steering Stopper, RRP Carbon Pad (color of Your choice) and all hardware to mount on hydrospace S4<br>You will love the new handling with best Handlepole Conversion Set-Up You can buy worldwide		';
artikel[242]='TBM117HSR	HYDROSPACE	150.00	TBM Racing hydrospace Race Bumpers	../stuff/hs-bumper.jpg				Enhance the look and handling of your Hydrospace S4 with our race bumper kit.<br>High quality rubber and 3M peel and stick adhesive insures a long lasting durable bumper to protect your investment.<br>The bumpers also enhance the handling by reducing the sharp edge of the bond flange which makes the ski corner smoother reducing the edgy feel of the stock handling.		';
artikel[243]='HS102	HYDROSPACE	295.00	Jettrim HYDROSPACE BOTTOM 8 PIECE MAT SET	../2011/hs102.jpg				JETTRIM Hydro Space S4 Bottom 8 piece mat set Freestyle Black Naug w/Gunmetal Carbon Trim w/Silver Stitch 		';
artikel[244]='HT100	HYDROSPACE	135.00	Hydro Turf S4 Mat Kit	../s4/ht100.jpg				Hydro Turf traction mat set and 2" kick tail<br>Your back will be thankfull for this modification 		';
artikel[245]='PD1151	HYDROSPACE	55.00	Versiplug Drain System for hydrospace	../2009/versiplug-hsr.jpg				The automatic drain solution<br>The reliable self-balling drain plug kit now special for Hydrospace<br>Black anodized		';
artikel[246]='57-4055	HYDROSPACE	26.50	Duck Bill Flapper only	../stuff/rubber.jpg				Replacement Duck Bill Flapper.<br>Better Quality than original hydrospace Rubber		';
artikel[247]='SL009	HYDROSPACE	9.90	Replacement Impeller Rubber Nose Boot	../2010/SL009.jpg				Replacement Impeller Nose Boot for Solas Hydrospace S4 Impeller		';
artikel[248]='YTX20L-BS	HYDROSPACE	99.95	Yuasa original Watercraft Battery	../2009/yuasa.jpg				Original Yuasa Battery<br>Same size as original hydrospace Banner Battery but higher quality - special watercraft battery and not a normal motorcycle battery<br>Maintenance-free design, tested to the extreme<br>Original Yuasa quality		';
artikel[249]='Optimate	HYDROSPACE	59.95	OptiMate 4	../2011/optimate4.jpg				Truly unique diagnostic battery optimiser for 12V lead-acid batteries up to 50Ah, whether sealed maintenance-free, gel, or "flooded" type with filler caps<br>Microprocessor control, deep-discharge diagnosis<br>Recovery and TURBO recovery, Unique charge optimisation and verification system<br>Automatic power loss test, 5 possible status test results<br>Energy-efficient, low heat rise<br>Sealed weather-proof housing, built-in replaceable mounting lugs		';
artikel[250]='7800	HYDROSPACE	474.80	Super B 7800 Lithium Ion starter battery	../2012/7800.jpg				Lightweight Lithium Ion starter battery, 1.3 kg kilogram<br>Replace the much heavier 14 to 20 Ah lead/acid battery<br>Recharges many times faster: within 5 minutes after starting your engine the battery will be recharged<br>Size(WxHxD) / 120mm x 95mm x 82mm<br>Longer service life: more than 5 years instead of 2 to 3 years<br>Has a low self-discharge rate		';
artikel[251]='10P	HYDROSPACE	593.80	Super B 10P Lithium Ion starter battery	../2012/10P.jpg				Easy Weigth saving on front of hydrospace and much more starting energy as orginial fluid battery<br>Also charging is much faster as lead-acid battery<br>Stops the often empty battery on hydrospace and starting problem<br>Lightweight Lithium Ion starter battery, 1.75 kg kilogram<br>Replace the much heavier 20 to 35 Ah lead/acid battery<br>Delivers up to 600 Cranking Amps<br>Recharges many times faster: within 5 minutes after starting your engine the battery will be recharged<br>Size(WxHxD) / 120mm x 127mm x 82mm<br>Longer service life: more than 5 years instead of 2 to 3 years<br>Has a low self-discharge rate	<br>Recommended for 3cylinder with Total Loss system or Runabout Jetski	';
artikel[252]='SP	HYDROSPACE	97.60	Lithium Ion starter battery charger	../2012/SP.jpg				Lithium Ion battery charger 220V<br>Recommended for all super B batteries		';
artikel[253]='YAAMFPSJ03	SUPERJET	789.00	701 SuperJet Mod B-Pipe	../superjet/bpipe.jpg				The Factory Pipe 701 SuperJet Mod system comes complete with tuned exhaust manifold, tunable cast headpipe, aluminum chamber, and all required hardware<br>Fit on all Yamaha SuperJet 1994-2012		';
artikel[254]='5900	SUPERJET	11.60	Factory B-Pipe Exhaust Green Gasket 	../motor/exhaust-gasket-wet.jpg				Factory Pipe Exhaust Manifold gasket for all B-Pipe Exhaust system		';
artikel[255]='COMHOS0100	SUPERJET	32.00	Factory B-Pipe Rubber Coupler 	../motor/wet-rubber.jpg				Factory Pipe Blue B-Pipe SuperJet Exhaust Coupler Rubber		';
artikel[256]='FAC007	SUPERJET	42.00	Factory B-Pipe Elbow Hose 	../2012/fac007.jpg				Silicone Elbow reducer Hose with the correct angle and diameters to fit Factory B Pipe stinger to Waterbox		';
artikel[257]='57-1162	SUPERJET	49.80	Motor Mounts Yamaha Superjet	../2010/enginemount.jpg				Monkey Grip Motor Mounts are designed to be stronger than OEM mounts<br>This combination of durability and performance make this engine motor mounts the right choice<br>Fit all year Yamaha Superjet 650 and 701 - all year		';
artikel[258]='WR201/WR228	SUPERJET	249.95	Worx Intake Grate Yamaha Superjet	../superjet/wr201.jpg		2008-2012|1996-2007		Improves hook-up and turning dramatically, it is great in rough water and surf riding because the pick-up area is wide and deep and not only loads the pump but it also allows you to ride hard up to a turn buoy and them when you come off the throttle the grate acts like a brake to slow you down and make the turn.		';
artikel[259]='TBM123-Y	SUPERJET	249.00	TBM Racing Yamaha Superjet Signature Series Ride Plate	../superjet/tbm-sj.jpg		2008-2012|1996-2007		TBM start from a clean sheet as the unique hull design coupled with the relocated pump made it challenging to find the best combination of speed, handling and straight line tracking.<br>You will notice two features when glancing at this plate, the unique stepped tail and the four triangular holes in the middle of the plate.<br>Both of these features coupled with a narrow tail and the TBM dual concave design make this plate a winner for any riding situation		';
artikel[260]='WR312	SUPERJET	239.00	Worx Rideplate for 2008-2011 SuperJet 	../superjet/wr312.jpg				Specifically designed for the 2008-2011 Yamaha Superjet hull<br>The pump was reconfigured and repositioned on the 2008-2012 SuperJet requiring a new design to get the maximum performance<br>Fit only Yamaha SuperJet 1996-2011		';
artikel[261]='DS32	SUPERJET	18.95	Impeller Wrench	../superjet/ds32.jpg				Fit for all original and aftermarket impeller for all Yamaha 650/701/760 Waverunner and SuperJet all year		';
artikel[262]='YB-CD-13/17	SUPERJET	289.95	Solas Blueprinted Concord Torque Impeller	../handling/concord.jpg				Solas Concord Freestyle Impeller, fit perfect with TBM Superpump Cone and B-Pipe modified SuperJet<br>Solas Concord - The Power Torque Series Impeller		';
artikel[263]='TBM120-SJ	SUPERJET	399.95	TBM PRO Super Pump Cone	../tbm/superpumpcone.jpg				TBM New PRO Super Pump Cone for Yamaha SuperJet<br>Due to the demands of Pro Racing Tim Bushmen have redesigned the Kawasaki Super Pump Cone to increase the strength and offer riders with the option to "tune" the pump for their particular set up or water conditions.<br>Included with new TBM PRO kit is the Super Pump Cone insert, a tail cone base that seals the pump and three different length tail cone tips.<br>The tail cone tips can be changed by simply removing one M6 bolt and replacing the tip with a different length to optimize your impeller and nozzle combination.<br>The short cone works well for Freestyle, Freeride and tight Closed Courses, while the medium and long tail cone works excellent for rough water hook up and amazing top speed<br>Fit for all year Yamaha SuperJet 1994-2012		';
artikel[264]='Sponson-SJ	SUPERJET	179.95	Yamaha SuperJet Black Race Front Sponsons 	../superjet/sj-sponson.jpg				Yamaha SuperJet 1996-2007 FAT-FRONT-SPONSONS with concave shape<br>Made in compressed polyurethane - Black color<br>Improve dramaticaly the stability of Your SuperJet and also better more aggresive turning possible<br>Fit all Yamaha SuperJet 1996-2012		';
artikel[265]='L30XTH-G	SUPERJET	26.50	odi Jetski X-Treme Lock-On Grips	../control/odi-x.jpg		Black|Grey		odi Revolutionary Non-Slip Technology for wettest environments on earth<br>Lock-On grips eliminates grip twisting and slippage without need for ties and glues<br>Fit on all handlebars included UMI, RRP or star bars<br>This is the perfect grip and a Must Have for all jetskis		';
artikel[266]='TLD	SUPERJET	27.50	Troy Lee Designs odi Jetski Lock-On Grips	../2011/tld.jpg		White|Red|Black		Grooved channels prevent mud and water buildup<br>Overmolded flap gives added protection on outside clamp<br>Unique undercut pads provide slip comfortable feel with maximum grip<br>Custom flanged design provides hand support with more usable grip surface<br>Laster etched reference marks on inside clamp simplify grip positioning on handlebar<br>Laser etched Troy Lee Designs logos on outside clamps		';
artikel[267]='HY-607XEP	SUPERJET	13.50	RRP Jetski Lock-On Grips	../2009/09grips.jpg				RRP Ruffian Lock-On Grips<br>Lock-On grips eliminates grip twisting and slippage without need for ties and glues<br>Fit on all handlebars included UMI, RRP or star bars<br>Unbeatable price		';
artikel[268]='HY-B	SUPERJET	49.95	Adjustable Finger Throttle with needle bearing	../2009/09throttle.jpg				Precision machined from aircraft grade aluminum feauturing a exclusive needle bearing pivot for smooth performance<br>Fully adjustable perch and ergonomically correct reduce hand fatigue<br>No sharp edge prevent for injury and smooth control.<br>Black Anodized		';
artikel[269]='58-0982	SUPERJET	79.95	PJS Billet Throttle Lever	../stuff/UKA01521BK.jpg				Billet constructed throttle features nylon cable roller, nylon bushing and thrust washers, 3 cable throw positions, 6mm stainless steel bolts<br>This lever is specially designed to contour around your index finger<br>The narrow lining allows you to gain quicker response on hole shots without your middle finger getting in the way of a full pull<br>Use and prefer from all hydrospace racers		';
artikel[270]='TBM118B-BLK	SUPERJET	79.95	TBM Hi Performance Adjustable Finger Throttle	../tbm/lever.jpg				Precision machined from aircraft grade aluminum feauturing a bushing pivot, fully adjustable perch and ergonomically correct reduce hand fatigue<br>This is the best finger throttle for SuperJet on market		';
artikel[271]='58-0991	SUPERJET	13.80	Throttle Cable Adapter	../2009/adapter.jpg		SuperJet all Year		Stainless Steel throttle cable adapter for Kawasaki, Yamaha, hydrospace to use with all aftermarket throttle lever<br>Much stronger then other aftermarket Throttle adapter because of use Stainless Steel		';
artikel[272]='A2109-PFW	SUPERJET	27.50	Pro Atlantis Pro Wrist Lanyards	../stuff/58-2501-BLK.jpg		SuperJet all Year		Atlantis Pro Floating laynard will stay secure during the most strenuos riding, inlcuded racing<br>Used by most Pro riders since years		';
artikel[273]='JL304-SJ	SUPERJET	49.95	Handle Pole HD Springs	../superjet/springsj.jpg				Fit on all Yamaha SuperJet 1996-2011<br>Greatly reduces weight of stock handle pole up to 75% and reduces rider arm and shoulder fatigue<br>Made in Japan		';
artikel[274]='HJF-BK	SUPERJET	69.95	Hot Products Watercraft Handlebar with Pad	../control/starbar.jpg		4°|0°		Fit on original and aftermarket steerings<br>High quality black anoized aluminum with bar pad<br>Made in France		';
artikel[275]='002-055-06	SUPERJET	69.95	Yamaha SuperJet Throttle Cable	../superjet/sj-cable.jpg				Yamaha SuperJet 701 throttle cable<br>Fit all year 1996-2012 Yamaha SuperJet		';
artikel[276]='GM6-61481-00	SUPERJET	119.95	Yamaha SuperJet Steering Cable	../superjet/sj-steering.jpg				Yamaha SuperJet 701 steering cable<br>Fit all year 1996-2012 Yamaha SuperJet		';
artikel[277]='HP-YAM	SUPERJET	799.95	RRP Adjustable Handlepole	../2006/rrp.jpg				Rick Roy innovative adjustable Handlepole for Yamaha SuperJet<br>Extra strong design using 6061 T6 aluminum tubes.<br>Quickly fully adjustable in seconds to rider preference length<br>Lighter than original handlepoles<br>Original Yamaha Superjet steering and pad fit with RRP<br>Fit all Yamaha SuperJet 1996-2012		';
artikel[278]='QL-02	SUPERJET	24.00	Quick Loop for Yamaha SuperJet	../2010/ql2.jpg				Fit with original Yamaha SuperJet Front Boye Eye<br>Easy to mount		';
artikel[279]='HT751	SUPERJET	99.00	Hydro Turf Yamaha SuperJet Mat Kit	../superjet/sj-HT.jpg				Hydro Turf mat kit are designed to replace worn or damaged provide better traction and better resistance materials then stock mat kit<br>Fit Yamaha SuperJet 1996-2012 		';
artikel[280]='V3140-794-2	SUPERJET	320.00	V-Force 3 Valve System 	../motor/vforce.jpg				New VForce 3 Valve system kit<br>New cage and carbon reeds design give You the most power and response<br>Works with all engine modification<br>Complete set (2 reed block and gaskets)<br>Fit all Yamaha SuperJet all Year<br>701 and 760 Engines		';
artikel[281]='4253	SUPERJET	354.00	MSD 650/701 Enhancer Ignition	../2011/msd.jpg				At lower rpm You will notice incedible acceleration and throttle reponse due to advancing the timing<br>Then as the rpm increases, the timing is retarded to the factory setting to prevent detonation and engine damage<br>Adjustable RPM limiter - need for exhaust modification<br>Very easy to install and factory connectors for a easy direct plug-in installation<br> All Yamaha 650/701 SuperJet 		';
artikel[282]='UL23001	SUPERJET	120.00	Racing Ignition Coil	../2008/SuperCoil.jpg				Stock Improved Coil for all year Yamaha SuperJet 650/701 all year<br>Produce hotter stronger spark<br>High Quality - Made in Japan		';
artikel[283]='3270M	SUPERJET	120.00	High Quality Bendix for Yamaha	../stuff/gear.jpg				Aftermarket High Quality Starter Gear (Bendix)<br>Fit all Yamaha SuperJet 650, 701 and 760 Engines		';
artikel[284]='C1095-NA	SUPERJET	135.00	Hiqh Torque Startermotor	../stuff/starter.jpg				Aftermarket Startermotor<br>Fit all Yamaha 650/701 Watercraft Engine - all year		';
artikel[285]='TBM124-YAM	SUPERJET	599.00	Yamaha 701 Lightweight Charging Flywheel 	../superjet/sj-wheel.jpg				TBM using the highest grade aircraft aluminum available and an engineered design that will withstand the most powerful engines and abusive riding<br>Weighing in at 2.0 pounds this is by far the lightest Yamaha charging flywheel on the market<br>Fit all Yamaha SuperJet 1994-2012		';
artikel[286]='2550	SUPERJET	59.95	Top End Engine Gasket Kit 	../motor/00762701.jpg				Aftermarket Top End Gasket Complete Kit<br>Fit Yamaha SuperJet 1996-2012		';
artikel[287]='ProX-SJ	SUPERJET	105.00	Pro-X Piston Kits 	../motor/prox.jpg		81.00|81.25|82.00|82.50|83.00		ProX Piston Kits are manufactured in Japan and are designed to be OEM replacement<br>The aluminum alloy exceeds the factory specifications<br>Kit comes complete with piston, piston pin, ring set and clips		';
artikel[288]='HR4061	SUPERJET	565.00	HOT RODS New Complete Crankshaft	../motor/crank.jpg				All new assembly. Crankshafts are sold complete with Hot Rods Connecting rods, main bearings and inner crankshaft webs<br>Trued to within .001<br>Hot Rods crankshafts are completetely rebuildable<br>Fit all 650/701/760 Engine		';
artikel[289]='422510	SUPERJET	49.95	ProX Crankshaft Oil Seal Kit 	../motor/sealkit.jpg				High Quality Crankshaft oil seal kit fit all 650/701/760/1100/1200 Yamaha Engine<br>(Complete set with all three seals needed)		';
artikel[290]='TBM-SJ-C	SUPERJET	99.95	TBM Yamaha Super Jet Billet Driveline Coupler 	../superjet/tbm-c.jpg				TBM Yamaha Super Jet billet driveline coupler is significantly lighter and stronger than any other coupler on the market.<br>TBM billet coupler has lightening holes that eliminate material where it is not needed for the structural integrity of the part<br>Designed to accept a Kawasaki driveline damper which is smaller in diameter reducing unnecessary rotating weight and is more vibration absorbent.<br>Uses Kawasaki O.E.M. damper		';
artikel[291]='006-585	SUPERJET	49.95	PROK Multi-Fit Flame Arrestor 	../motor/prok.jpg				Prök Multi-Fit revolutionized the flame arrestor industry and is the choice of top teams and riders around the world<br>From the quality of its non-absorbing stainless element, to the internal support and large parabolic cone, its performance is cutting edge<br>The rubber base of the Multi-Fit clamps around any conventional carburetor adapter flange<br>Weighing in at only 148g, it is the lightest in the world but its quality and construction put it with our Quick-Fit as the strongest in the world able to hold over 300lbs of weight		';
artikel[292]='53-4274-BLK	SUPERJET	69.95	Tau Ceti Racing 2.5 Tornado Filter Black 	../motor/534272blk.jpg				NEW Tau Ceti Tornado Series air filter with a cone shape filter feature a clear velocity cone to get more and faster air inside ventury for maximum power<br>This is now the highest quality air filter on market - only made from highest quality aluminum and rubber with stainless steel screen<br>For stock our jetting kit will give best performance and also air filter adapter needed		';
artikel[293]='WR125-225	SUPERJET	18.95	Outerwears Pre-Filter for Tau Ceti or Prök air filter	../motor/wr-125.jpg		Prok|Tornado		Outerwears pretilter is an excellent solution to prevent water from entering into the engine without restricting air flow or causing a loss in performance<br>Rec. for freestyle, freeride and also all racing modifications 		';
artikel[294]='53-4460	SUPERJET	24.50	Mikuni Aluminum air filter adapter for SuperJet 	../motor/adapter.jpg				Fit all year original carburator Yamaha SuperJet 1996-2012		';
artikel[295]='53-9928	SUPERJET	29.95	Mikuni Dual Primer Kit 	../motor/primer.jpg				A cure for hard-starting motors. Draws fuel from the fuel line to give the carburator a blast of fuel for easy staring.<br>Eliminates the need of chokes plates for better air flow and power and adds to battery life<br>Included all hardware, plunger, lines, zip ties, brass and t-fitting and spigot &caps<br>Fit Yamaha Superjet 1996-2012		';
artikel[296]='NGK	SUPERJET	4.00	NGK Solid Spark Plugs	../stuff/ngk.jpg		BR7HS|BR8ES		Solid Steel Terminal<br>BR7HS for original Head and BR8ES (long) for all aftermarket SuperJet Head Kits		';
artikel[297]='TB05EM	SUPERJET	8.80	NGK Resistor Cover	../handling/tbm05em.jpg				Waterproof spark plug resistor covers for use on most Year Yamaha SuperJet<br>Same 5K OHM like original		';
artikel[298]='PD1151	SUPERJET	55.00	Versiplug Drain System Universal Mount	../2009/versiplug-hsr.jpg				The automatic drain solution<br>The reliable self-balling drain plug universal kit comes with mounting plate<br>Black anodized		';
artikel[299]='25D	SUPERJET	34.80	Rule Bilge Pump 500GPH	../stuff/rule.jpg				Rule Electric Bilge Pump - must have for freestyle, freeride and racing to keep Your SuperJet dry on wildest tricks and roughest race conditon at sea		';
artikel[300]='57-4006	SUPERJET	9.80	Rule Plastic Strainer Base	../2009/57-4006.jpg				Replacement Blue Plastic Strainer Base, fit all Rule Bilge Pumps		';
artikel[301]='57-3030	SUPERJET	9.95	Bilge Electrical Parts Kit	../stuff/fuse.jpg				Kit contains waterproof fuse holder, 5amp fuse, ring terminal, shirnk tubing		';
artikel[302]='57-4008x2	SUPERJET	5.60	Rule Flexible Plastic Hose	../stuff/rule-hose.jpg				Rule flexible Bilge Plastic Hose<br>Comes in exact needed length and fit with Rule and aluminum Bilge Fittings		';
artikel[303]='57-3020	SUPERJET	49.95	Waterproof Panel Mount Bilge Switch	../stuff/jl-switch.jpg				3-Way Panel Mount Switch connects to two electronic accessories for power control<br>High quality and waterproof<br>Made in Japan		';
artikel[304]='57-3003SJ	SUPERJET	99.95	Waterproof Standard Bilge Switch with Mounting bracket	../stuff/hot-switch.jpg				Waterproof on/off switch<br>Extra long cable for fit on handlebar<br>Mounting bracket is machined from billet alloy and is anodized black to prevent corrison<br>Easy to mount under original Yamaha Start/Stop switch		';
artikel[305]='57-4015	SUPERJET	17.50	Bilge Fitting	../stuff/bilge-fitting.jpg		Black|Silver		Straight Bilge Fitting<br>Aluminum trough hull outlet fitting		';
artikel[306]='JS-02000	SUPERJET	15.50	UMI 90° Bypass Fitting	../stuff/fitting.jpg		Black|Silver		Water bypass fittings increase engine performance by diverting from water from cylinder head to the bypass fittings<br>This fittings are made with aluminum and allows more water flow than original SX-R rubber fitting.<br>90° anglded like orginal fitting		';
artikel[307]='JS-03200	SUPERJET	17.50	Aluminum Bow Eye Bushing	../stuff/boyeyes.jpg		Black|Silver		Change Your original weak plastic bow eye with this aluminum bushing		';
artikel[308]='53-9970	SUPERJET	5.00	Fuel Line or Primer Line (Clear Blue) 	../motor/fuelline.jpg		Fuel Line|Primer Line		High quality clear blue Fuel or Primer Line<br>Fuel or Primer Line is sold per 1 Meter 		';
artikel[309]='53-9953	SUPERJET	3.80	Fuel Filter 	../motor/filter.jpg				High quality fuel line filter that fit in original and aftermarket fuel lines on all jetski 		';
artikel[310]='53-9928	SUPERJET	6.00	Water Line Hose (Blue) 	../motor/waterline.jpg		3/8"|1/2"		Flexibility, Durability, abrasion resistance, light weitht, chemical resistance, high pressure capability waterline blue<br>Waterline is sold per 1 Meter 		';
artikel[311]='52-3119	SUPERJET	59.95	Jet Works Pro Flow Control Valve	../stuff/jetworks.jpg				The Pro Flow Control Valve provides improved throttle response and much quicker starts by drying out your waterbox at low rpm and idle speeds<br>The Pro Flow Control Valves allows unrestricted water flow to the Stinger (Factory B-Pipe) for better top speed and control the amount of water at low speeds for better throttle response<br>Fully adjustable		';
artikel[312]='59-4017	SUPERJET	7.40	Squeeze On Stainless Steel Clamp (10pcs/pk) 	../2009/594017.jpg		3/8"|1/2"		High quality stainless steel squeeze on clamps for 3/8 or 1/2 waterlines<br>Quick and simple to install<br>Crimp on clamps are extremely strong and do not break or come loose like conventional hose clamp<br>Packing included 10 pieces 		';
artikel[313]='64-0030	SUPERJET	2.20	Stainless Hose Clamp	../2011/640030.jpg				Stainless Hose Clamp for 1/2 and 3/8 waterline<br>8-22mm - High quality		';
artikel[314]='7800	SUPERJET	474.80	Super B 7800 Lithium Ion starter battery	../2012/7800.jpg				Over 5KG weight saving to original liquid acid battery and still more starting power<br>Lightweight Lithium Ion starter battery, 1.3 kg kilogram<br>Replace the much heavier 14 to 20 Ah lead/acid battery<br>Recharges many times faster: within 5 minutes after starting your engine the battery will be recharged<br>Size(WxHxD) / 120mm x 95mm x 82mm<br>Longer service life: more than 5 years instead of 2 to 3 years<br>Has a low self-discharge rate<br>Recommended for SX-R800		';
artikel[315]='SP	SUPERJET	97.60	Lithium Ion starter battery charger	../2012/SP.jpg				Lithium Ion battery charger 220V<br>Recommended for all super B batteries		';
artikel[316]='11040	JETPILOT	69.90	JetPilot Appex Side Entry Vest CE	../2011/11040.jpg		S/M Black|L/XL Black|S/M Green|L/XL Green|S/M Red|L/XL Red		JetPilot Appex 2011 Side Entry Vest - CE Approved		';
artikel[317]='11037	JETPILOT	199.90	JetPilot Appex Race John and Jacket	../2011/11037.jpg		Large|X-Large		JetPilot Appex 2011 Race John and Jacket Black		';
artikel[318]='11038	JETPILOT	199.90	JetPilot Appex Race John and Jacket	../2011/11038.jpg		Small|Medium		JetPilot Appex 2011 Race John and Jacket Green		';
artikel[319]='11039	JETPILOT	199.90	JetPilot Appex Race John and Jacket	../2011/11039.jpg		Small|Medium|Large		JetPilot Appex 2011 Race John and Jacket Red		';
artikel[320]='90163	JETPILOT	75.00	JetPilot Flight Race Tour Coat	../2011/90163.jpg		Small|Medium|Large		JetPilot Flight Race Tour Coat		';
artikel[321]='11089	JETPILOT	39.90	JetPilot Bordshort Moto Head	../2011/11089.jpg		30|32|34		JetPilot Bordshort Moto Head Bordie Green		';
artikel[322]='10031	JETPILOT	39.90	JetPilot Bordshort Hardcore	../2011/10031.jpg		34		JetPilot Bordshort Hardcore Bordie White / Green		';
artikel[323]='11137	JETPILOT	25.00	JetPilot Tee	../2011/11137.jpg		Medium|Large		JetPilot Black/Green T-Shirt		';
artikel[324]='11213	JETPILOT	15.00	JetPilot Sticker Sheet	../2011/11213.jpg				JetPilot A4 Sticker Sheet		';
artikel[325]='10219	JETPILOT	2.00	JetPilot Logo Sticker 20cm	../2011/mx20.jpg		Black|White		JetPilot Logo Sticker 20cm size		';
artikel[326]='10219	JETPILOT	4.00	JetPilot Logo Sticker 40cm	../2011/mx20.jpg		Black|White		JetPilot Logo Sticker 40cm size		';
artikel[327]='BEJJ911-20	QUAKYSENSE	220.00	quakysense The Best Jacket & John (BLACK)	../2011/best20.jpg		X-Small|Small|Medium|Large|X-Large		2011 quakysense Super Flex Material 3mm/2mm Neopren<br>LongJohn + Jacket, 2pieces.<br>Please allow two week for delivery - Ask for all other color		';
artikel[328]='BEJJ911-60	QUAKYSENSE	220.00	quakysense The Best Jacket & John (WHITE)	../2011/best60.jpg		X-Small|Small|Medium|Large|X-Large		2011 quakysense Super Flex Material 3mm/2mm Neopren<br>LongJohn + Jacket, 2pieces.<br>Please allow two week for delivery - Ask for all other color		';
artikel[329]='BEJJ911-70	QUAKYSENSE	220.00	quakysense The Best Jacket & John (GREEN)	../2011/best70.jpg		X-Small|Small|Medium|Large|X-Large		2011 quakysense Super Flex Material 3mm/2mm Neopren<br>LongJohn + Jacket, 2pieces.<br>Please allow two week for delivery - Ask for all other color		';
artikel[330]='PB911-20	QUAKYSENSE	110.00	quakysense The Best Pullover Life Vest (BLACK)	../2011/pull20.jpg		Small|Medium|Large|X-Large		2011 quakysense Pullover Premium Race Vest<br>Please allow two week for delivery - Ask for all other color		';
artikel[331]='PB911-60	QUAKYSENSE	110.00	quakysense The Best Pullover Life Vest (WHITE)	../2011/pull60.jpg		Small|Medium|Large|X-Large		2011 quakysense Pullover Premium Race Vest<br>LongJohn + Jacket, 2pieces<br>Please allow two week for delivery - Ask for all other color		';
artikel[332]='PB911-70	QUAKYSENSE	110.00	quakysense The Best Pullover Life Vest (GREEN)	../2011/pull70.jpg		Small|Medium|Large|X-Large		2011 quakysense Pullover Premium Race Vest<br>LongJohn + Jacket, 2pieces<br>Please allow two week for delivery - Ask for all other color		';
artikel[333]='SJJ911-20	QUAKYSENSE	220.00	quakysense SUPREME Jacket & John (BLACK)	../2011/supreme.jpg		X-Small|Small|Medium|Large|X-Large		2011 quakysense Super Flex Material 3mm/2mm Neopren<br>LongJohn + Jacket, 2pieces<br>Please allow two week for delivery - Also available White color		';
artikel[334]='QLC911-20	QUAKYSENSE	179.00	quakysense SHQ LONG Tour Coat	../2011/SHQ.jpg		Medium|Large|X-Large		quakysense SHQ LONG COAT<br>Extra Long for cold weather riding		';
artikel[335]='QSC-0107-G	QUAKYSENSE	499.95	quakysense Semi Dry Wetsuit	../quakysense/semidry.jpg		Small|Medium|Large|X-Large		quakysense 5mm Semi Dry Wetsuit keeps You inside dry and perfect for real cold weather riding<br>quakysense design a wetsuit that would provide maximum comfort and durability while still protecting against the elements.<br>Now You can ride Your Jetski also in real cold winter time		';
artikel[336]='N30-1033	APPAREL	15.00	n-style Monster Energy Decal Kit 	http://www.mcm50.com/monster/nstyle.jpg				n-style new Monster Decal Kit		';
artikel[337]='199Lives	APPAREL	22.50	Nitro Circus Gimp 199 Lives Tee	http://www.mcm50.com/NitroCircus/199lives.jpg		Small|Medium|X-Large		Nitro Circus 199 Lives Tee		';
artikel[338]='199bomber-hoodie	APPAREL	49.00	Nitro Circus 199 Bomber Zip Hoodie	http://www.mcm50.com/NitroCircus/199bombhoody.jpg		Small|Medium		Nitro Circus 199 Bomber Zip Hoodie		';
artikel[339]='electric-hoodie	APPAREL	49.00	Nitro Circus Electric Zip Hoodie	http://www.mcm50.com/NitroCircus/electric.jpg		Medium|Largee		Nitro Circus Electric Zip Hoodie		';
artikel[340]='bomber-hoodie	APPAREL	49.00	Nitro Circus Bomber Hoodie	http://www.mcm50.com/NitroCircus/bomber-hoodie.jpg		Medium|Large		Nitro Circus Bomber Hoodie		';
artikel[341]='brim-hat	APPAREL	29.00	Nitro Circus Flat Brim Hat	http://www.mcm50.com/NitroCircus/brim.jpg		S/M|L/XL		 Nitro Circus Flat Brim Hat		';
artikel[342]='ball-cap	APPAREL	29.00	Nitro Circus Ball Cap	http://www.mcm50.com/NitroCircus/hat.jpg		S/M|L/XL		 Nitro Circus Ball Cap White		';
artikel[343]='bomb-beanie	APPAREL	25.00	Nitro Circus Big Bomb Beanie	http://www.mcm50.com/NitroCircus/bomber-beanie.jpg				Nitro Circus Big Bomb Beanie<br>Uni size		';
artikel[344]='nitro3	APPAREL	1.20	Nitro Circus Logo Clear Sticker 7cm	http://www.mcm50.com/NitroCircus/nitro-sticker.jpg		White		Nitro Circus Logo Clear Sticker 7cm width		';
artikel[345]='nitro7	APPAREL	2.20	Nitro Circus Logo Clear Sticker 18cm	http://www.mcm50.com/NitroCircus/nitro-sticker2.jpg		Black|White		Nitro Circus Logo Clear Sticker 18cm width		';
artikel[346]='nitro9	APPAREL	3.00	Nitro Circus Logo Clear Sticker 23cm	http://www.mcm50.com/NitroCircus/nitro-sticker3.jpg		Black|White		Nitro Circus Logo Clear Sticker 23cm width		';
artikel[347]='laynard	APPAREL	5.80	Nitro Circus Laynard	http://www.mcm50.com/NitroCircus/nitro-lanyard.jpg				Nitro Circus Laynard		';
artikel[348]='14-68050	APPAREL	15.00	Metal Mulisha Sticker Kit	http://www.mcm50.com/FX/MM.jpg				Factory Effex Metal Mulisha Decal Kit		';
artikel[349]='M18589211	APPAREL	2.00	Metal Mulisha Iconoclast Sticker 7,5cm	http://www.mcm50.com/mm/icon3.jpg		Black|Red|Green		Metal Mulisha Iconoclast Sticker Black (7,5cm)		';
artikel[350]='M18589211	APPAREL	3.00	Metal Mulisha Iconoclast Sticker 20cm	http://www.mcm50.com/mm/icon8-r.jpg		Black|Red|Green		Metal Mulisha Iconoclast Sticker Red (20cm)		';
artikel[351]='17589124	APPAREL	2.00	Metal Mulisha Helmet Sticker 7,5cm	http://www.mcm50.com/metalmulisha/helmet.jpg				Metal Mulisha Helmet Sticker (8cm)		';
artikel[352]='17589125	APPAREL	3.00	Metal Mulisha Helmet Sticker 15cm	http://www.mcm50.com/metalmulisha/skull.jpg				Metal Mulisha Helmet Sticker (15cm)		';
artikel[353]='M11782100	APPAREL	33.60	Metal Mulisha Burn Baby Burn Towel	http://www.mcm50.com/m/baby.jpg				Metal Mulisha Burn Baby Burn Towel - Badetuch		';
artikel[354]='M405S21420	APPAREL	45.70	Metal Mulisha Exposed Fleece	http://www.mcm50.com/metalmulisha/exposed.jpg		Small|Medium|X-Large		Metal Mulisha Exposed Fleece Hoodie		';
artikel[355]='M215S18268-RED	APPAREL	22.50	Metal Mulisha Corpu 2 Black/Red Logo Tee	http://www.mcm50.com/m/corpu.jpg		S|M|L		Metal Mulisha		';
artikel[356]='M215S18268-WHITE	APPAREL	22.50	Metal Mulisha Corpu 2 White Logo Tee	http://www.mcm50.com/m/corpu1.jpg		S|M|L|XL		Metal Mulisha		';
artikel[357]='M215S18268-GREEN	APPAREL	22.50	Metal Mulisha Corpu 2 Black/Green Logo Tee	http://www.mcm50.com/m/corpu2.jpg		S|M|L|XL		Metal Mulisha		';
artikel[358]='M30572302	APPAREL	39.50	Metal Mulisha Black Metal Backpack	http://www.mcm50.com/mm/blackmetal.jpg				Metal Mulisha Black Metal Backpack		';
artikel[359]='M30572300	APPAREL	39.50	Metal Mulisha Blackout Backpack	http://www.mcm50.com/mm/blackout.jpg				Metal Mulisha Blackout Backpack		';
artikel[360]='A8130	CLOSEOUT	10.00	Atlantis Floating Vest Laynards 	../2011/atlantis.jpg				Floating Vest Laynards<br>Fit for Yamaha and Hydrospace		';
artikel[361]='01-01-702	CLOSEOUT	10.00	Factory SX-R Dry Pipe Sleeve-Coupler 	../2011/B1.jpg				Blowsion Replacement Silicone Sleeve-Coupler for SXR Dry Pipe<br>Updated with special new more durable Blowsion Racing Red compound		';
artikel[362]='04-03-104	CLOSEOUT	40.00	Blowsion Billet Fuel Cap for Kawasaki 	../2011/B2.jpg		Silver|Black		Blowsion Billet Fuel Caps for Kawasaki Jetski		';
artikel[363]='macc	CLOSEOUT	60.00	Speedmagic Macc Racing Throttle Lever 	../2011/macc.jpg				Throttle Lever Macc from Speedmagic<br>Green Color		';
artikel[364]='blowsion	CLOSEOUT	35.00	Blowsion Airforced Airfilter	../2011/blowsion.jpg		Yellow		Blowsion Airforced Round Air Filter (Made by Tau Ceti)		';
artikel[365]='rd	CLOSEOUT	70.00	R&D Cone Airfilter (two pieces)	../2012/rd.jpg				R&D Cone Airfilter Set (Two pieces)<br>Fit all air filter adapter for Jetski 		';
artikel[366]='CHIEE0809	CLOSEOUT	160.00	quakysense Flex Jacket & John CHIEE (BLACK/WHITE)	../quakysense/chiee.jpg		X-Small		quakysense Super Flex Material 3mm/2mm Neopren<br>LongJohn + Jacket, 2pieces		';
artikel[367]='QS96-70	CLOSEOUT	100.00	quakysense Flex 96 Jacket und John	../quakysense/flex-09.jpg		Black/Green(M)		quakysense Super Flex Material 3mm/2mm Neopren<br>LongJohn + Jacket, 2pieces		';
artikel[368]='CE102	CLOSEOUT	40.00	quakysense Womens Star Nylon Vest 	../quakysense/women-vest.jpg		X-Small		quakysense 4 Buckle Women Nylon Vest CE<br>Black/White<br>Weight range 50KG - Chest range 71-81cm		';
artikel[369]='COMIGN0016	CLOSEOUT	12.00	Factory Pipe Timing Advance Connector	../2012/fp-plug.jpg				Factory Pipe Timing advance Connector for all original 2004-2011 Kawasaki SX-R800 ignition systems<br>With this temp sensor connector will advance original timing 6 degrees<br>Small power increase on stock engine<br>Very easy install in less than one minute		';
artikel[370]='UL053	CLOSEOUT	22.50	Billet Aluminum Electric Box Cap	../stuff/UL053.jpg		Silver		Designed for electric box of Kawasaki 750/800 series<br>O-Ring Seal included		';
artikel[371]='EW2-67711-01-00	CLOSEOUT	160.00	Original Tank Yamaha SuperJet 1996-2012	../2012/sj-tank.jpg				Original Yamaha Tank for SuperJet 1996-2012 		';
artikel[372]='KA750SXBM	CLOSEOUT	50.00	ap-design Bottom Mat for Kawasaki SX/SXI 750 	../2011/ka750sxbm.jpg				ap-design Kevlar Bottom Mat for Kawasaki SX/SXI 750		';
artikel[373]='FSKW3	USED	35.00	Freestyle Pump Cone	../2012/fs-cone.jpg				Freestyle Pump Cone for all Kawasaki 750/800 original Kawasaki pumps<br>Freestyle cones are specially designed to maximize low end performance<br>Lets the engine rev faster 		';
artikel[374]='SXR-hood	USED	450.00	2011 SX-R Engine Hood	../2012/hood.jpg				Original 2011 SX-R800 Engine Hood<br>Take off from a brand new SX-R - never used<br>Fit all 2003-2011 SX-R800 		';
artikel[375]='SXR-nose	USED	50.00	2011 SX-R Front Nose	../2012/nose.jpg				Original 2011 SX-R800 Front Nose<br>Take off from a brand new SX-R - never used<br>Fit all 2003-2011 SX-R800 		';
artikel[376]='used-carb	USED	500.00	SX-R 800 Carb System complete 	../used/carb.jpg				Complete SX-R800 Mikuni Carb System with Manifold and Airbox<br>Take out of a new SX-R800 - never used		';
artikel[377]='used-pole	USED	250.00	SX-R 800 Pole Kit 	../used/pole.jpg		Black|2011 Green		Complete SX-R800 Pole Kit used<br>Included Pole, Cover, Steering cable bracket, steering complete, handlebar, throttle lever, grips, cover		';